iStorage datAshur Pro2 Operation & User’s Manual

Text of the manual

iStorage datAshur PRO2® User Manual v2.1

Please make sure you remember your PIN (password), without it there is no way to access the data on the drive. If you are having difficulty using your datAshur PRO2 please contact our support team by email - [email protected] or by phone on +44 (0) 20 8991 6260.

iStorage datAshur PRO2® User Manual v2.1

www.istorage-uk.com Copyright © iStorage, Inc 2019. All rights reserved. Windows is a registered trademark of Microsoft Corporation. All other trademarks and copyrights referred to are the property of their respective owners. Distribution of modified versions of this document is prohibited without the explicit pe

iStorage datAshur PRO2® User Manual v2.1

Table of Contents Introduction ...........................................................................................................................................................................................4 Box contents ..............................................................

iStorage datAshur PRO2® User Manual v2.1

www.istorage-uk.com Introduction Box Contents Thank you for purchasing the iStorage datAshur® PRO2, an ultra-secure and easy to use, hardware encrypted USB 3.2 Gen 1 PIN authenticated flash drive with capacities up to 512GB and rising. The datAshur PRO2 incorporates a rechargeable battery allowing the user to

iStorage datAshur PRO2® User Manual v2.1

1. LED indicators and their actions LED LED State Description LED LED State Description RED Solid Locked device (in either Standby or Reset states) RED, GREEN and BLUE Blinking Waiting for User PIN entry RED - Fade Out Device Turning off to the Idle State GREEN and BLUE Blinking together W

iStorage datAshur PRO2® User Manual v2.1

www.istorage-uk.com 3. First Time Use Note: When datAshur PRO2 is unlocked and not connected to a USB port and no operations are performed within 30 seconds, the device will enter Idle State automatically. The LED turns to solid RED and then fades out to the idle state. When datAshur PRO2 is connected to a USB

iStorage datAshur PRO2® User Manual v2.1

To configure an Admin PIN and unlock the datAshur PRO2 for the first time, please follow the simple steps in the table below. Instructions - First Time Use LED LED State 1. Press and hold down the SHIFT ( ) button for one second RED, GREEN and BLUE LEDs blink once in sequence then the GREE

iStorage datAshur PRO2® User Manual v2.1

www.istorage-uk.com 5. To Enter Admin Mode To Enter Admin Mode, do the following. 1. Press and hold down the SHIFT ( ) button for one second RED, GREEN and BLUE LEDs blink once in sequence then the GREEN LED blinks twice and finally switches to a solid RED LED indicating the device is in Standby State 2.

iStorage datAshur PRO2® User Manual v2.1

7. Changing the Admin PIN PIN Requirements: • Must be between 7-15 digits in length • Must not contain only repetitive numbers, e.g. (3-3-3-3-3-3-3) • Must not contain only consecutive numbers, e.g. (1-2-3-4-5-6-7), (7-8-9-0-1-2-3-4), (7-6-5-4-3-2-1) 1. In Admin mode pres

iStorage datAshur PRO2® User Manual v2.1

www.istorage-uk.com 8. Setting a User PIN Policy The Administrator can set a restriction policy for the User PIN. This policy includes setting the minimum length of the PIN (from 7 to 15 digits), as well as requiring or not the input of one or more 'Special Characters'. The “Special Character” functions

Other Storage Manuals