iRobot 600 Series Setup Manual

Text of iRobot 600 Series Setup Manual

The setup guide for a Wi-Fi connected Roomba.

Follow these three simple steps to get started with a Wi-Fi connected Roomba vacuuming robot. Step 1: Activate Roomba  In an uncluttered area, place the Home Base® charging station flat against a wall on a level floor surface. Visit Positioning the Home Base to optimize the position of the Home Base.  Plug one end of the line cord into the Home Base and the other into a wall outlet.  Remove the yellow

If no sound is heard after pressing the buttons during activation, check the following to complete

setup.  Ensure the Home Base® is plugged in.  Be sure that Roomba is on the Home Base.  If the indicators are not illuminated, press the CLEAN button to wake up the robot.  Ensure you press and hold the Dock and Spot buttons on either side (Roomba 900 series) or around (Roomba 600 and 800 series) the CLEAN button when activating Wi- Fi. For Wi-Fi

iRobot Vacuum Cleaner Owners Instructions: