KeepGuard KG Series Instruction Book

equipped with built-in infrared LEDs, so that it can be triggered by any movement in a location, then take high quality pictures or video clips. Please refer to the notes below and instructions in this manual to ensure that you are completely satisfied with this product. Quick Start 2 Notes 3 View Drawings 4 Camera Overview 5 Standard Accessories 6 Power Supply 7 SD Card 7 Operational Modes 8 Settings 9~16 Mounting and Positioning 17 Specification 18 Warranty Card 19 KEEPTIME Applicable models：KG790 Contents Highly Recommended by Outdoor Explorers - KeepGuard Wildlife Scouting Cam KG Cams Instruction Book 1

Load 8 lithium AA or alkaline AA batteries Insert the SD card Switch to the SETUP Mode Press MENU key Press UP key to select Camera or Video Mode Put it good position Switch to the ON Mode and it have started working KEEPTIME Quick Start 2

2. Do not set the camera directly from ON to Setup. 3. To replace the battery, SD card, firstly turn camera to OFF model. 4. Color of Indicator 1) When camera is updating, indicator light flashes green. 2) The indicator light flashes red when it is turned on or ready for operation. 3) low battery, the indicator light blue. 4) long standby time, the indicator flashes purple. 5. Batteries need to use dry batteries, can not use rechargeable batteries. 6. When the SD card is inserted into camera, make sure that the SD card is not in the unprotected state. 7. When using an external power supply, make sure that voltage is correct. 8. Please take out the battery for long time unused, so as to avoid leakage of the battery time is too long. 9. Camera can not be directly immersed in water, can not be placed in the environment of strong acid and alkali. 10. Finger can not press the Fresnel lens. 11. Keep the lens and battery compartment clean. 12. Do not use sharp hard objects to attack the screen and so on. KEEPTIME Notes 3

Camera Overview KEEPTIME 「IR LED」 「LDR」 「PIR」 「Lens」 「LED Indicator」 「lock catch」 「Display Screen」 「Operation Part」 「Battery Case」 「ON-OFF Key」 5

1×solar panel KEEPTIME Standard Accessories 1×Belt 1×USB 1×Case 1×Manual Other Accessories 6

you will see that it has 8 battery slots. For maximum battery life, we recommend using 8 lithium AA or alkaline AA batteries. Please be sure to insert each battery with correct polarity (negative or“flat”end against the long spring of each battery slot). Insert the SD card ( OFF mode ) before beginning to operate the camera. SD card is supported up to maximum 64GB capacity. KEEPTIME Power Supply SD Card 64G B 7

SETUP position will turn on the LCD display and you will see an information screen. The cam has three basic operational modes: 「OFF」, 「ON」 and 「SETUP」 ●「OFF 」Mode When cam in OFF mode, you can do the following: • replacing the SD card or batteries • connecting cam with other device by USB port It will occur a little of power consumption under OFF mode. If you won't use it for a long time, please take batteries off. ●「ON」Mode Once in ON mode no manual controls are needed or possible (the control keys have no effect). The cam will take photos or videos automatically (according to its current parameter settings) when it is triggered by the PIR sensor′s detection of activity in the area it covers. T T 3M 1080P 0000/0888 Camera Mode Time Stamp ON Time Scan ON SD Card Battery Level Video Mode Image Resolution of Photos Taken Audio Rec ON Video Resolution Available Video Recording Time KEEPTIME Operational Modes 8

and LEFT/RIGHT keys ( to move to the next field ) to set the hour ( 24-hr format only, “00”=midnight,“12”=noon) and minute, and then (on the lower row ),the year,month and date. Once all settings are made, press OK to save. Dual Camera Selects whether still photos or video clips are captured when the camera is triggered. “Dual”=Camera+Video Set Exit Image Size OK 8M MENU 16M 3M Selects resolution for still photos from 3 to 16 megapixels. Higher resolution produces better quality photos, but creates larger files that take up more of the SD card capacity. KEEPTIME Settings 9

in Camera mode. This setting affects photos taken in Field Scan mode as well. Super Fine Selects image resolution (in pixels per frame). Higher resolution produces better quality, but creates larger files that take up more of the SD card capacity (fills up faster). Image Format 4:3 Set Exit OK MENU KEEPTIME Settings Normal 16:9 10

resolution produces better quality videos, but creates larger files that take up more of the SD card capacity (fills up faster). Video Length Sets length per captured video clip. Settings begin with 10 second default when parameter is first selected. After stepping down to 5s, video length settings start over at 60s. 10s Set Exit OK MENU Settings Camera Name Set Exit Camera Name OK Input MENU Allows the user to set a custom name for the camera. Useful for ID purposes when multiple cameras are setup, since each camera will imprint its name on all photos (but not videos) it captures. 1920*1080 11 KEEPTIME

it responds to any additional triggers from the PIR after an animal is first detected and remains within the sensor's range. During this user set“ignore triggers”interval, the camera will not capture photos/videos.This prevents the card from filling up with too many redundant images. Set Exit Coordinate Input OK OFF MENU ON Using the Setup Menu Input Screens"Allows user to input latitude and longitude coordinates for camera's location.This data will be embedded in files saved on camera’s SD card. 10s KEEPTIME Settings Time Period Set Exit Time Period Set OK MENU Press OK and use UP/DOWN keys ( to change the setting ) and LEFT/RIGHT keys ( to move to the next field ) to set time. Once all settings are made, press OK to save. Note: two time blocks can not appear overlap section, or you will not set it successfully. For example: A 8:00-12:00 B 13:00-23:00, this is OK for set. OFF ON 12

Time Scan forces the camera to take photos or videos even when it is not triggered by an nearby live animal,useful for constant monitoring of an area that might be far away from the camera. The user can set start and stop times for up to two in dependent “blocks”of Time Scan recording,as well as the interval time between each photo/video OFF ON KEEPTIME Settings Sensor Level Set Exit Sensor Level OK Auto MENU NV Shutter Set Exit NV SHUTTER OK Auto MENU Four levels: Auto, Low, Meduim, High Four levels: Auto, Low, Meduim, High 13

shows“****”, you can reset pasword by yourself. Settings Image Recycle Set Exit Image Recycle OK OFF MENU ON When SD card full, the last pics will be removed. Time Stamp Set Exit Time Stamp OK OFF MENU ON 14 KEEPTIME

Settings Video Sound Set Exit Video Sound OK OFF MENU ON Format SD Card Set Exit Format SD Card OK Execute MENU Deletes (erases) all files stored on a card to prepare it for reuse. Always format a card that has been previously used in other devices. Caution! Make sure you have downloaded and backed up any files you want to preserve first! Press OK to execute, press MENU (or select NO then press OK) to exit without formatting. 15 KEEPTIME

the original factory default settings. Set Exit Default Settings OK MENU Execute KEEPTIME Settings Version Set Exit Version OK MENU KG790 170320A 16

Mounting Optimum height：5-6.5 inch（1.5-2 m） Optimum distance：60inch（9m）- 10inch（3m） There are two ways to mount cam: using the provided adjustable web belt, or the tripod socket. •Using the adjustable web belt: Push one end of the belt through the two brackets on the back of cam. Thread the end of the strap through the buckle. Fasten the belt securely around the tree trunk by pulling the end of the strap firmly so there is no slack left. •Using the tripod socket:The camera is equipped with a socket at the bottom end. Sensing Angle and Distance Test To test whether cam can effectively monitor the area you choose, this test is recommended to check the sensing angle and monitoring distance of cam. To perform the test: •Switch cam to SETUP mode. • Make movements in front of the camera at several positions within the area. Try different distances and angles from camera. • If indicator LED light flash, it indicates that position can be sensed. The results of your testing will help you find the best place where mounting and aiming the cam. The height from the ground for placing the device should vary with animal size appropriately. In general,3 to 6 feet is preferred. You can avoid potential false triggers due to temperature and motion disturbances in front of the camera by not aiming it at a heat source or nearby tree branches or brush (especially on windy days). 17

IR-Flash Range 25m-30m; 48 LEDS Display Screen 2.4 inch HD Color Display Image Size 3MP;8MP;16MP Capture Number 1-9 Video Size 640x360; 1280x720; 1920x1080 Video Length 5s-60s Interval 1s-60m Operation Day/Night Power Supply 8×AA recommended;12V Interface USB;SD card; Operating Temperature -20-60℃（Storage temperature:-30-70℃） Operating Humidity 5%-90% Security Authentication FCC/CE/RoHs/WEEE Language English, Français, Español, Deutsch, Italiano, Pусский, Subcontinental, Slovak, 繁體中文, 简体中文 18

Your Name Your Add Your Tel Warranty State During warranty, hardware failure occurring, which caused by product itself, we will provide free maintenance service for the customer. Free warranty is for the first year. If there is a need for repair, you should offer this warranty card, please take care of this card. KEEPTIME Warranty Card 19

目录 21

→打开扣柄，打开前壳 →打开电池仓并放入八节锂电池或者碱性干电池 →将SD卡插入相机 →将相机切换到SETUP模式 →按下菜单按钮, 按上下键选择相应模式 →按左右键设置其它参数 →将相机从SETUP切换到ON模式，相机开始工作 KEEPTIME 快速操作流程 22

1.设置相机参数时，请将相机拨到Setup模式下。 2.不可将相机从ON档位直接拨到Setup档位。 3.更换电池，SD卡时，需先将相机拨到OFF档位。 4.指示灯颜色变化 1）更新软件时，指示灯闪绿色。 2）开机或者准备工作时，指示灯闪红色。 3）低电量时，指示灯闪蓝色。 4）长时间待机时，指示灯闪紫色。 5.电池需用干电池，不可以使用充电电池。 6.SD卡插入相机时，需确保SD卡在非保护状态。 7.使用外部电源时，请注意电压是否合适。 8.长时间不用相机时，将电池取下，以免电池漏液，腐蚀相机。 9.相机不可直接浸泡在水中，不可置于强酸强碱的环境下。 10.手指不可按压菲涅尔透镜。 11.保持镜头和电池仓的清洁。 12.不可用尖锐硬物攻击屏幕等。 KEEPTIME 使用前注意事项 23

KEEPTIME 外观及按键说明 「显示屏」 「电池仓」 「开关键」 「操作区」 「LED 灯」 「镜头」 「LED 指示灯」 「红外感应器」 「扣柄」 25 「光敏电阻」

1× 铁壳 1×适配器 1×微距镜头/广角镜头 1×云台 1×太阳能电池板 KEEPTIME 标配 1×绑带 1×USB线 1×包装盒 1×说明书 选配 26

开始操作相机前请插入SD卡，储存卡最大容量支持64GB。 在插入SD卡前，请确保相机是处于OFF模式。 在打开两个扣柄之后，您会在相机的右边看到八节电池槽。为了 使电池寿命最大化，我们建议使用八节锂电池或碱性干电池。 放入电池时，请确保电池的正负极放置正确。 KEEPTIME 电池的安装 SD卡的安装 64G B 27

●SETUP模式 在SETUP模式下，可以检查或者更改相机设置。将开关键拨到SETUP模式，显示点亮，菜单出现，检查设置及回放的预览。 相机有三个基础操作模式 ●OFF模式 当相机在OFF模式下，您可以从事以下操作： •更换SD卡或者电池 •通过USB插口连接其他设备 ●ON模式 一旦ON 模式启动，不可再进行手动设置（控制键没有效果），这款户外无线机可根据您当前的设置要求，红外感应器所覆盖的范围内 感应到有热量体活动时会自动进行拍照或者录像。 T T 3M 1080P 0000/0888 相机模式 时间戳 定时扫描 SD卡已装载 电池电量 摄像模式 图像分辨率 拍摄照片数量 录音打开 录像分辨率 录像时长 KEEPTIME 操作模式 28

时间 模式 图片像素 Set Exit Set Clock OK Set MENU Set Exit Mode OK Video MENU 按下OK键，使用上下键和左右键（移动到下一个选项）设置小 时（24小时制，“00”=午夜“12”=中午）和分钟，接下来设 置年月日，一旦所有设置完成，按下OK键保存。 Dual Camera 三种选择模式，相机模式，视频模式，“双模式”=相机+录像。 Set Exit Image Size OK 8M MENU 16M 3M 3百万到1千6百万像素的照片可供选择。高的分辨率会产生高质 量的照片，但是也会占用较大的储存卡空间。 KEEPTIME 设置 29

连拍数量 照片质量 照片比例 Set Exit Capture Number OK 9 MENU Set Exit Image Quality OK Fine MENU 在相机和双模式下，照片的连拍张数 Super Fine 选择照片的帧率，帧率越高，照片质量越高，且照片的所占内存越 大 Image Format 4:3 Set Exit OK MENU KEEPTIME Settings Normal 16:9 2种比例：4:3和16:9 30

录像尺寸 录像长度 Set Exit Video Size OK 1280*720 MENU 640*360 录像尺寸越大，越清晰，内存占用越大 Video Length 录像长度默认10秒，用户可自主设置时长，5秒到60秒 10s Set Exit OK MENU Settings 相机名称 Set Exit Camera Name OK Input MENU 方便客户辨认相机，相机的名称会显示在照片上 1920*1080 31 KEEPTIME

OK MENU 按下OK键使用上下键（改变设置）和左右键设置时间。一旦所有设 置完成，按下OK键保存。 注意：两个时间不可以重叠，出现重叠时，相机弹出提示框，所设时 间段无效。 例如: A 8:00-12:00 B 13:00-23:00 OFF ON 32

定时扫描 Set Exit Time Scan OK MENU 定时扫描模式开/关，当开启时，定时扫描的时间区间内，即使不会被 触发，相机也将自动拍照。这个可以防止相机感应不到远距离的目标 物时而导致的错过。用户可以设置开始和结束时间,以及每张照片/视 频之间的间隔时间。 OFF ON KEEPTIME Settings 感应灵敏度 Set Exit Sensor Level OK Auto MENU 快门速度 Set Exit NV SHUTTER OK Auto MENU 四个等级可供选择: 自动，高，中，低 四个等级可供选择: 自动，高，中，低 33

密码。 Settings 循环存储 Set Exit Image Recycle OK OFF MENU ON SD卡满 的时候，相机会自动按顺序删除最老的照片以便存储新的 照片 时间戳 Set Exit Time Stamp OK OFF MENU ON 打开时间戳，可以看到照片拍摄的时间，以及月相，会显示在照片 上 34 KEEPTIME

OK Execute MENU 清除所有储存文件以备循环使用，请将其他机子上使用过的SD卡格 式化，注意保存好所需的文件。 35 KEEPTIME

默认设置 选择执行键，并按下OK键将所有的参数恢复默认设置。 Set Exit Default Settings OK MENU Execute 版本号 Set Exit Version OK MENU KG790 170320A Settings 36 KEEPTIME

最佳距离：60英尺（9米）- 10 英尺（3米） 有两种方法可以安装相机：使用提供的可调节绑带或者三脚架。 •使用可调节的绑带：把带子的一端通过相机外部的两个括口，穿好后用扣系紧，把绑带紧紧地系到树干上，确保其不会脱落 。 •使用三脚架：通过相机底部的三角安装好相机。 感应角度和距离测试 测试相机是否可以有效的感应您所选择的区域，我们建议进行相机的感应角度和距离测试。测试： •相机开关键处于SETUP模式下。 •在相机感应的范围内做几个您期望的游戏或者主题。尝试从相机的不同角度和距离开始测试。 •如果LED情景指示灯闪烁，表明相机可以感应到。 这项测试的结果可以帮助您更好的选择安装相机的地点，相机的高度应该和所拍摄的动物的高度相适应，总的来说，3到6英尺是最好 的选择。你可以避免由于温度和运动障碍或者附近的树木或者东西擦过时的相机无法对准红外感应器所感应到的热源。 KEEPTIME 安装和定位 37

感应距离 25米-30米; 48个 LEDS 显示频 2.4寸高清彩屏 照片尺寸 3MP;8MP;16MP 抓拍 1-9 录像尺寸 640x360; 1280x720; 1920x1080 录像长度 5秒-60秒 间隔 1秒-60分钟 操作模式 白天/夜间 电源 8×AA 干电池;12V电压 表面 USB;SD 卡槽; 温度 -20-60℃ 湿度 5%-90% 证书 FCC/CE/RoHs/WEEE 语言 英语，法语，德语，俄语，西班牙语，意大利语，芬兰语，斯洛伐克语，繁體中文，简体中文 38

Warranty保修卡 型号 机身号 购买日期 客户姓名 客户地址 客户电话 保修说明 在保修期间，硬件发生故障，产品本身造成的，我们将为 客户提供免费的维修服务。免费保修期为一年。如果有需 要修理的，需提供这张保修卡，请保管好此保修卡。 KEEPTIME 保修卡 39