KeepGuard KG Series Manuals

This KeepGuard cam is the best-selling scouting camera which is designed for activity and is resistant against water and snow. It is equipped with built-in infrared LEDs, so that it can be triggered by any movement in a location, then take high quality pictures or video clips. Please refer to the notes below and instructions in this manual to ensure that you are completely satisfied with this product. Highly Recommended by Outdoor Explorers - KeepGuard Wildlife Scouting Cam KG Cams Instruction Book Contents Quick Start 2 Notes before use 2 Camera Overview 3~4 Operation Part 4 Accessories 4 Power Supply 5 SD Card 5 Operational Modes 6 Settings 7~11 Mounting and Positioning 12 Specification 13 Warranty Card 14 KEEPTIME Applicable models：KG691, KG762, KG785 → Move the latches and open the front cover → Load 8 lithium AA or alkaline AA batteries → Insert the SD card → Switch to the SETUP Mode → Press MENU button → Press UP or DOWN key to select Camera or Video Mode → Put it good position → Switch to the ON Mode and it have started working. ● Be sure the camera′s power is switched OFF before inserting or removing SD cards or batteries. ● Check to make sure you have used new alkaline or lithium batteries. We recommends using a full set of 8 Energizer R Lithium AA batteries to obtain maximum battery life. ● Batteries or DC power supply inserted/connected with correct polarity and the power level is sufficient. ● SD card have sufficient available space and is its write-protection (lock) switch off. ● Always move the power switch from OFF to SETUP mode. It is possible that the camera could lock up if it is switched from ON to SETUP mode. If this occurs, please move the switch to OFF and then push it up to SETUP again. Quick Start Notes Before Use 2 KEEPTIME Camera Overview 「IR LED」 「LDR」 「PIR」 「Lens」 「LED indicator」 「Display Screen」 「Menu Operation」 「Power Switch」 「USB port」 「SD Card Slot」 「Microphones」 KEEPTIME

This KeepGuard cam is the best-selling scouting camera which is designed for activity and is resistant against water and snow. It is equipped with built-in infrared LEDs, so that it can be triggered by any movement in a location, then take high quality pictures or video clips. Please refer to the notes below and instructions in this manual to ensure that you are completely satisfied with this product. Quick Start 2 Notes 3 View Drawings 4 Camera Overview 5 Standard Accessories 6 Power Supply 7 SD Card 7 Operational Modes 8 Settings 9~16 Mounting and Positioning 17 Specification 18 Warranty Card 19 KEEPTIME Applicable models：KG790 Contents Highly Recommended by Outdoor Explorers - KeepGuard Wildlife Scouting Cam KG Cams Instruction Book 1 Move the latches and open the front cover Load 8 lithium AA or alkaline AA batteries Insert the SD card Switch to the SETUP Mode Press MENU key Press UP key to select Camera or Video Mode Put it good position Switch to the ON Mode and it have started working KEEPTIME Quick Start 2 1. When setting camera parameters, please put camera in Setup mode. 2. Do not set the camera directly from ON to Setup. 3. To replace the battery, SD card, firstly turn camera to OFF model. 4. Color of Indicator 1) When camera is updating, indicator light flashes green. 2) The indicator light flashes red when it is turned on or ready for operation. 3) low battery, the indicator light blue. 4) long standby time, the indicator flashes purple. 5. Batteries need to use dry batteries, can not use rechargeable batteries. 6. When the SD card is inserted into camera, make sure that the SD card is not in the unprotected state. 7. When using an external power supply, make sure that voltage is correct. 8. Please take out the battery for long time unused, so as to avoid leakage of the battery time is too long. 9. Camera can not be directly immersed in water, can not be placed in the environment of strong acid and alkali. 10. Finger can not press the Fresnel lens. 11. Keep the lens and battery compartment clean. 12. Do not use sharp hard objects to attack the screen and so on. KEEPTIME Notes 3