KMS SPA18 Operation & User’s Manual
Text of KMS SPA18 Operation & User’s Manual
9 in 1 Hydra Beauty Skin System
KMS-SPA18
IMPORTANT: before starting the equipment correctly, please follow the installation instructions.
Any damages caused by incorrect operations will void the warranty.
。
NEW
TECH
Thank you for choosing our products! This user instruction is specially designed for the safety of you and
others. Please read the instructions carefully before installing or using the machine and follow them when
using.
1.1 Electrical Safety
- Before installing the machine, make use that your local electric network complies with the volta
Mechanism of spray oxygen
Operating steps
1.Clean skin deeply.
2. Click
the “Spray gun ”on as Fig.5 shows,
3. You can set the operation time on Fig.3
4.Mix 2 ~ 3 drip SPA essential oil diluted with purified water into small cup of the o2 sprayer,water
should be about 2 / 3 of the cup, and then tighten the lid tightly. Oxygen sprayer c
4, Bio micocurrent
Microcurrent is a safe and effective technology for clients who wish to attainmaintain a healthier and younger looking
appearance.
Benifits :
Non-invasive facelift
Reduce and eliminate fine lines and wrinkles
Improve skin circulation
Improve hypergimentation and acne
Increase product penetration
5,Photon light (PDT)
The general introduct
Spray mist gun
3
size
vacuum
pen
Bio microcurrent
Photon light
Collect bottle
Glasses
Others
Power supply line and seal ring etc.
Install:
Figure 1
1. Open the package and get all the spare parts out ,
2. Connect the bio micro current handle on port 11;
3. Hydrodermabrasion hose connect the inlet port 13;
4. put the hydro dermabrasion outlet hose into the port 12;;(Fig.1)
5. Connect the spray mist gun to port 14 ;
6, Connect the vacuum pen to port 15;
7. Conect the photon light to 20,21,22,23 chan
Operating Interface :
1,The main interface is like below(Figure2),pls set the time like Figure 3;
2,Touch Hydro to choose hydro dermabrasino treatment
(Figure 4) ,4 bottles to fill in different
solutions , pls choose anyone you want to use ,and adjust the vacuum you want ,then choose
to begin: ;
Figure.2
Figure3
3,Choose Spray and touch
to begin spray treatment (Figure 5)
4,PDT,adjust
,and adjust
,Chosse the
Figure.4
Figure.5