KIRTON Florien User Instructions

Text of KIRTON Florien User Instructions

1-2 Introduction to the Florien

2 The Florien Product Information 2 Questions and Concerns 2 Guidelines for Best Practice 3 The User Instructions General Operation of the Florien: 3 Adjusting the chair for the user 3 What is Tilt-in-Space? 3 Operating the Tilt-in-Space 4 Legrest Elevation 4 Adjustable Headrest 4 Removeable Arms 5 Lateral Supports 5 Footboard 5 Headrests 6 Wheels 6 Lap-Belt 6 Service and Maintenance In

Introduction to the Florien chair

Why is there a need for this type of chair? The ability of a seated person to function efficiently and perform activities depends on their ability to adopt the appropriate posture. All activity is posture dependent. If a person cannot move or has problems adjusting their posture, it may be necessary to use seating to try to provide externally what is limited internally. The Florien helps fulfil the need to maintain an indi

The User Instructions

The purpose of the following user instructions is to provide a guide on how to utilise, adjust and maintain the Florien chair. These instructions should be read by all those involved with the supervision of the user and/or the care of the chair before use. Please retain these instructions with the Care and Maintenance card enclosed for future reference. Adjusting the chair for the user The Florien must be adjusted in terms of t

The legrest can be elevated or

retracted independently of the tilt-in- space positioning by utilising the lever on the right hand underside of the legrest. • To move the legrest in either direction hold the bottom or left hand side of the legrest to ensure stability whilst with the right hand lift the lever on the right hand underside upwards. • The legrest can be moved either up or down according to the user’s requirements. •

The footboard provides added support

and positioning for the feet. • It has a fixed 90° angle and is height adjustable. • The length of the footboard can be extended or shortened according to user need by simply loosening the butterfly knob underneath the legrest and moving the footboard up or down accordingly. • Care should be taken when extending the footboard and bringing the chair forwards through tilt-in-space

Locate the end of each D-Ring strap

down both sides of the seat cushion at the rear of the chair. • Attach the Lap-Belt using the hook fastening at the end of each strap to clip onto the D-Rings. • To use the Lap-Belt effectively, undo the buckle joining the two halves of the strap by depressing the button on the central console and place the straps over the arms or to the side of the seat before transferring the user into the chair. • When the u

The Pelvic Positioner is used to help

position users securely in the back of the chair for those with low muscle tone or control in their pelvis. Please note that D-Ring Straps are required to fix the Pelvic Positioner to the chair. • The chair should be unoccupied before fitting the Pelvic Positioner. • Lay the positioner out flat. • Place the positioner in the seat of the chair with the buckles pointing toward

KIRTON Medical Equipment Owners Instructions: