Kirsch Cellular Shade Collection Getting Started

Text of Kirsch Cellular Shade Collection Getting Started

Cellular Shade Collection

Vertical Cellular Automation Installation Instructions GETTING STARTED Product View.................................................................................................................................................................. 1 Tools and Fasteners Needed......................................................................................................................................... 2 INSTALLATION Install

*Located inside headrail

Inside Mount Adaptor Moving Rail Fabric Carriers Extension Bracket Optional Outside Mount Hardware: 1∕8" Shim 1∕2" Spacer Block Stationary Rail Extension Cable 18V DC Power Supply (Optional) Headrail Cord Tensioners* Battery Wands Moving Rail Bracket* Installation Brackets Manual Control Button Gear Box Motor Ribbon Cable C

Thank you for purchasing the Kirsch® Cellular Shade Collection. With proper installation,

operation, and care, your new shades will provide years of beauty and performance. To get started, unpack the shade and remove all foam/packaging materials. Check that all parts shown on the packing list are included with the order. Please thoroughly review this instruction booklet before beginning the installation. IMPORTANT: Cords are wrapped aro

Installation Brackets Required

■ ■The number of installation brackets required varies with headrail width, as shown in the table. Installation Overview Installation of Vertical Celullar shades varies based on the shade mounting type, stacking design, and the valance type selected. Mounting Types and Window Terminology ■ ■Review the mounting types and basic window terminology illustrated below. Determine if your shade is

■Determine where to place the top of the installation brackets.

➤ ➤Add the desired floor clearance to the ordered height of the shade. The ordered height can be found on the packaging label. A minimum of 1⁄2" floor clearance is recommended. ➤ ➤Measure the total distance up from the floor. This is where to place the top of the installation brackets. ➤ ➤A minimum flat vertical surface of 11⁄4" is required to

■Attach the spacer blocks and installation brackets with #6 hex head mounting screws long

enough for a secure installation. (See chart below.) Longer screws are not provided. ➤ ➤The top of the spacer blocks should be at the desired shade height. ➤ ➤The front edges of the installation brackets must be level and aligned to each other. CAUTION: Use drywall anchors when mounting into drywall. CAUTION: The rear of the

Kirsch Indoor Furnishing Owners Instructions: