kingsley-bate gl45 Assembly Instruction

0Fine Garden Furniture 1ASSEMBLY INSTRUCTIONS FOR THE GL - 45 RIGHT END FRAME BACK LEFT END FRAME SHORT LEG STRETCHERS SEAT * NOTE A TENON B MORTISE HOLE STEP-I Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood. NOTE: During assembly of the furniture pleas e match all joints with the corresponding letter or numbers stamped on the furniture. STEP-II Find the END FRAME with the numbers stamped next to the mortise holes and carefully lay it down. Ma tching the numbers next to the mortise holes with those on the te nons fit the BACK into the END FRAME mortise ho ...

side of the SEAT and on the corresponding side of the END FRAME align the seat and put it into position as shown in the diagram. STEP-IV Carefully slide the FRONT SEAT RAIL into position. If necessary, gently rock the part while pushi ng the tenon into the m ortise holes until the joint fits snugly together. STEP-V Slide the LONG LEG STRETCHERS and THE SHORT LEG STRETCHERS into position as shown in the diagram . ***NOTE THAT ALL LEG STRETCHERS ARE LABELED WITH “FACING DOWN” STICKERS*** STEP-VI Carefully fit the opposite END FR AME onto all exposed tenons. It may be necessary to use a m allet again to ensu ...

corresponding holes with sharp, direct blows. BE CAREFUL NOT TO MAR THE WOOD. (Please reference the diagram s above and to the left). STEP-VIII Insert screws through the underside of the SEAT to secure it to the end frames. USE A PROPER SCREWDRIVER FOR THIS TASK. IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE DEALER NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU FOR CHOOSING OUR FURNITURE. * KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE 2 IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY 72 ...