Longrun LRF-3300S Manual
Text of Longrun LRF-3300S Manual
LRF-3300S is a wall-mount, clamp- on type
ultrasonic flowmeter which use the transfer
time technology. Clamp on type ultrasonic
flowmeter is easy to install and no need to
cut off the pipe, that saves you lots of
troubles and cost. At the same time
LRF-3300S has our unique calculate
software to ensure the high accuracy and
low veloc
Double-shielded transducer cable
Standard/maximum cable length:30ft/1000ft(9m/305m)
IP65
Up to 99% RH,non-condensing
240*128 back lit LCD
Transmitter: -40℉~140 ℉(-40℃~
24 hours service: +86-186-5435-6933 Tel: +86-543-3382666 Fax: +86-543-3615999
E-mail: [email protected] skype: Longruncn Website: www.ultrasonicscn.com
LRF-3300S Ultrasonic Flowmeter
0.5 Clamp-on type
24 hours service: +86-186-5435-6933 Tel: +86-543-3382666 Fax: +86-543-3615999
E-mail: [email protected] skype: Longruncn Website: www.ultrasonicscn.com
E-mail: info@ultrasonics
Installation site selection
The first condition for ultrasonic flow meter is the pipe must be full of liquid, the
bubbles will greatly influence the accuracy of the measurement, please avoid the
follow installation position:
The suggestion installation area is as following:
A is for upright pipeline, please notice the water direction is from the bottom to to