Neets echo plus Installation Manual

Foreword The purpose of this document is to describe how to install and configure the Neets Control – EcHo Plus, hereafter mentioned as EcHo Plus. COPYRIGHT - All information contained in this manual is the intellectual property of and copyright- ed material of Neets. All rights are reserved. You may not allow any third party access to content, information or data in this manual without Neets’ express written consent. CHANGES - Neets reser ...

Important Safety Instructions Caution: Read these instructions: Read and understand all safety and operating instructions before using the equipment. Keep these Instructions: The safety instructions should be kept for future reference. Heed all Warnings: Follow all warnings and instructions marked on the equipment or in the user information. Avoid Attachments: Do not use tools or attachments that are not recommended, because they may be hazard ...

Contents Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Revision list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Description EcHo Plus is a compact yet surprisingly intelligent AV control system. It is remarkably simple to use, thanks to an intuitive graphical interface with a minimum number of buttons. With EcHo Plus anyone can start up a presentation without complicated procedures. Simply press ONE button and you are ready to begin! EcHo Plus is a perfect choice for the classroom, meeting or conference room and is easy to install. EcHo Plus can control ...

Quick guide to the EcHo Plus Buttons, indicators and connectors are available on the front and rear panels. These are shown below: Front: Number: Description 1 Push buttons for controlling the AV setup 2 Red LED lights for indication of AV setup status 3 Front cover with label for button description 4 Mini USB for programming (behind front cover) Rear: Number: Description 1 RS-232 port, Bi-directional 2 RS-232 or IR port, Uni-directional 3 NEB ...

Installation The EcHo Plus can be installed in standard electrical back boxes or by using mounting brackets. Each model (DK, US, EU) fits in typical boxes matching specific installation requirements for the country of sale. 1. Prepare the installation site by installing the needed back box or brackets. Pull the needed cables through the back box or bracket. 2. Mount the supplied connectors to the cables as needed and connect to the control s ...

US version Insert screws matching the back box into the two mounting holes. Secure the con- trol system to the back box or bracket without overtightening the screws. Mount the frame on the control system with the supplied screws. Insert a flathead screwdriver gently and pry out the front cover. Remove the front cover and the paper label behind it. Remount the paper label, insert a printed transparent label showing the button functions, and m ...

Neets Control EcHo Plus, DK P/N#: 310-0252 LAN GND GND I/O 1 I/O 2 I/O 3 PWR NDA NCL GND GND TX-1 TX-2 RX-1 GND 12V Neets Control EcHo Plus, DK P/N#: 310-0252 LAN GND GND I/O 1 I/O 2 I/O 3 PWR NDA NCL GND GND TX-1 TX-2 RX-1 GND 12V PIN 2 <-> Tx PIN 3 <-> Rx PIN 5 <-> GND Connections and Controls Power input port Connect the EcHo Plus to the supplied universal mains AC power adaptor. Using the supplied 2 pole screw block terminal connect white/ ...

Neets Control EcHo Plus, DK P/N#: 310-0252 LAN GND GND I/O 1 I/O 2 I/O 3 PWR NDA NCL GND GND TX-1 TX-2 RX-1 GND 12V When used as single IR port: Connect the IR emitter to TX-2 (striped wire) and GND, as shown above. Use Neets IR-Emitter When used as RS-232 transmit port: Connect the device to TX-1 and GND, as shown above. When used as dual IR port: Connect the IR 1 emitter to TX-2 (striped wire) and black wire on IR 1 emitter to IR 2 emitter ...

LAN port The network connector integrates the system into a local area network. Please connect the EcHo Plus to your LAN if using any of the LAN features of the product. Two LEDs on the connector indicate the following: Color: Off On Blink Yellow No Link Link Activity Green 10Mbit 100Mbit Factory default IP setting of the EcHo Plus is: IP address: 192.168.254.253 Subnet: 255.255.255.0 10/100Mbit: Auto DHCP: Disabled Buttons The eight front pa ...

Troubleshooting Error indication using LEDs If there is a fault in either the configuration or the EcHo Plus unit, this will be indicated on the front button LED indicators. Button LEDs 1-4 are used to indicate the error; the LED indicators are numbered as shown. The flashing error descriptions and patterns are described below: LED shows Description Solution 1 Off 2 Off 3 Off 4 Flashing No connection to one ...

Specifications Power input Input voltage 12 VDC Power Usage 1 W Connector 2 pin screw block Power adaptor (included) Input voltage 100 VAC – 240 VAC Line frequency 50 Hz – 60 Hz Max power usage Max 8 W RS-232 port Ports 1 x bi-directional Baud rate 1200 – 115200 bit/sec Data bits 7, 8 Parity Even, Odd, None Stop bits 1, 2 Connector 3 pin screw block RS-232 or IR port Ports 1 x uni-directional Baud rate 1200 – 115200 bit/sec Data bits ...