LIW Modi Buggy Manual 

NOTE! THE MANUFACTURER IS SOLELY RESPONSIBLE ONLY FOR THE EQUIPMENT PURCHASED FROM A DIRECT REPRESENTATIVE OF LIW CARE TECHNOLOGY, OR IN SPECIALIZED MEDICAL SHOPS REPRESENTING LIW CARE TECHNOLOGY IN POLAND. ...

Table of content: 1. Introduction ...................................................................................................................................................................... 3 2. General safety standards .......................................................................... ...

1. Introduction Developed and created by LIW Care Technology, first-class Pediatric Pushchair Modi Buggy (hereinafter referred to as the buggy), is designed to transport children who are not heavier than 30kgs). It is designed to facilitate the daily care of children who need transport, whose diseases ena ...

2. General safety standards For LIW Care Technology Sp. z o. o., the most important thing is to protect the patients who use our equipment. For ensuring the safety of Modi Buggy users, the following recommendations should be adopted: 1. Please read the Instructions before the first use. In case any quest ...

In these instructions for LIW Care Technology Sp. z o. o. products, you will find information marked with „NOTE!” symbol. It is used to the draw reader’s particular attention to the text. It looks as follows: NOTE! THE SYMBOL IS USED TO DRAW THE READER’S ATTENTION TO THE TEXT WHICH IS MARKED WITH ...

4. Weight and dimensions ...

No. Dimension Dimension symbol Dimension [cm] Size: Mini Size: Standard 1 Pelvic support spacing (seat width) SW 15÷28 17÷30 2 Seat depth SD 17÷28 27÷36 3 Turning angle TA -45⁰÷15⁰ -45⁰ ÷15⁰ 4 Back height BH 44,5÷60 50÷65 5 Back-support angle BA 20⁰÷90⁰ 20⁰ ÷90⁰ 6 Side supports l ...

5. Structure of the Modi Buggy Fig. 1 Structure of the buggy The wheelchair consists of1: 1. Push handle 2. Back plate 3. Seat 4. Head supports 5. Side supports 6. Hip supports 7. Roll bar 8. Frame 9. Front wheels, Rear wheels 10. Parking brake 11. Rear shock absorbers 1 The equipment of wheelchair is ...

12. Footrest 13. Vest 14. Pelvic belts 15. Basket 16. Canopy 17. Leg cover 18. Rain cover 19. Bag 20. Umbrella 21. Table 22. Loins support (for size MINI only) ...

6. Detailed mounting description of Modi Buggy For safety reasons, your buggy is supplied in two parts: the frame of the buggy (8), and the seat (3). To install the seat, you should: STEP 1. Unfold the frame (8) (→ See 8.1, p. 12) STEP 2. Attach the seat (3) to the frame (8) so that the mounting bars a ...

7. Moving the Modi Buggy For safety reasons, the buggy must be moved with its parts, separately the seat and separately the frame. Fig. 4 Correct manner of moving the buggy Fig. 5 Incorrect manner of moving the buggy ...

8. Detailed structure and adjustment description of Modi Buggy NOTE! AFTER EVERY SINGLE ADJUSTMENT, YOU NEED TO MAKE SURE THAT ALL THE COMPONENTS ARE CORRECTLY POSITIONED AND LOCKED. 8.1 Unfolding the buggy’s frame Fig. 6 Unfolding the buggy’s frame Fig. 7 Lock You need to set the frame vertically ...

Fig. 10 Direction lock You can see direction locks on the front wheels in the straight-ahead position. To use them, you need to pull the lever and turn it down. By lifting the lever up, you can easily change direction, Fig. 10. 8.2 Folding the buggy’s frame Fig. 11 Wheel dismounting Raise the buggy a ...

Fig. 13 Folding the frame Pull the handholds on both sides, and then push the handle down and fold the frame until the lock engages, Fig. 13. 8.3 Parking brake Fig. 14 Parking brake The rear wheels lock is activated with a lever on the cross-bar, right on the back of the frame. By pressing it, you lock ...

8.4 Back plate angle adjustment Fig. 15 Back plate Lift the lever on the back of the seat and move it to set the appropriate seat-back angle up to 20⁰÷90⁰ Fig. 15. 8.5 Push handle adjustment Fig. 16 Push handle Press the height control buttons simultaneously, set the bar to the desired height. Nex ...

8.6 Seat angle adjustment Fig. 17 Seat angle release Fig. 18 Seat angle adjustment Hold the seat, pull the control line for releasing the locking device, Fig 17, while positioning the seat angle from 15⁰ in the driving direction to 45⁰ in the opposite direction Fig. 18. NOTE! DUE TO A VERY HIGH D ...

8.7 Seat depth and hip supports adjustment Fig. 19 Seat locking knobs Loosen all locking knobs Fig. 19. Fig. 20 Seat depth adjustment Pull the seat base to a desired position, Fig. 20, and then tighten the knob (1) until there is noticeable resistance. Fig. 19. ...

Fig. 21 Hip supports adjustment Before re-locking the other knobs Fig. 19, slide apart/ slide hip supports. Their design allows an inclination to ensure the right tight pulling angle Fig. 21. 8.8 Height adjustment of the backrest Fig. 22 Backrest height adjustment Unscrew the fixing screws (1) and the l ...

8.9 Loins support adjustment (for size MINI only) Fig. 23 Loins support adjustment In Modi Buggy size MINI, there’s an option of cambering the back support. To adjust loins support, you should loosen the knob 2 (fig. 23) and next – using the allen key 4mm – tighten the bolt 1, until we obtain ...