Mastrad meat it Manual
Text of Mastrad meat it Manual
1. Before starting ����������������������������������������������������������� 1
A. Activate Bluetooth ��������������������������������������������������������� 1
B. Install the meat°it app ����������
2. Using the meat°it app
When the app starts up, a “Quick start” guide will show you how to install and use the
2
1. Before starting
A. Activate Bluetooth
1. Make sure your phone/tablet and the thermometer are sufficiently charged to proceed
with the pairing process . They do not need to be fully charged but both devices must
have sufficient charge not to run out of power during the process.
2. Activate Bluetooth on your phone, if it is not already s
2.2. Connecting to the thermometer
Once you are logged in, the app automatically searches for probes within range.
Make sure Bluetooth is activated on your phone.
When your probe is detected, click on it to program a cooking level.
If no probe is detected, you will be asked to refresh the page.
4
2.1. Registration and connection
When you use it for the first time, you will need to create an account so that you can log in. If
you already have an account wit
2.4. Setting a personalized cooking program
When you scroll through the different types of food, the final icon is for a personalized
cooking program. You can enter a specific “Name” for your cooking program and define a
temperature to the nearest degree (up to 212℉ (100°C)).
You can also leave a note about your personalized program.
Caution : When you start a cooking program, make sure that the probe is properly
inserted into
2.6 End of cooking program
Once the desired level of cooking, an audible alert warns you if the target temperature is
exceeded.
To end the cooking program, click on (stop graphic). You can set a resting time (up to 5 minutes).
At any point, you can take a photo of your cooking by pressing camera graphic. The app has
to be able to access to your camera, so make sure you give it access by clicking on “OK”.
You can either take a photo, or end your cooking
2.9 Cooking list
My favorites
Click on one of your favorite cooking programs to access your preferred cooking settings
automatically. Then you simply have to start the cooking program.
My history
All the cooking programs you complete are automatically recorded in “My history”.
Click on one of your previous cooking programs to see the details (1.7). You can also add a
previous cooking program to your favorites by clicking on the star at the top right.
1
Vibrate mode (ON/OFF)
Ringtone (ON/OFF)
Pre-alert (ON/OFF)
Keep the screen on (ON/OFF)
Unit (Celsius/Fahrenheit)
About – to go to page 2.12
Logout – to log out of the app.
About
To see information about the version of the software and application.
Click on “Website” to visit: https://www.mastrad-paris.fr/
12
2.10 Setting a timer/stopwatch
Stopwatch
Click to start the stopwatch.
To pause it, click .
To reset the
4. Frequently asked questions
1. What should I do if my probe is not detected?
Make sure that your Bluetooth is switched on and your probe is sufficiently charged. Do these checks
near the probe. If your probe is not detected when inserted into your meat/fish, remove it using the
extractor key and try to re-start it using the docking station/activation. (See diagram p.4)
2. What should I do if my probe is out of range?
If the probe is out of range, an audi
This device complies with Industry Canada’s licence‐exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux cond