Asus ITX-220 Operation & User’s Manual

June 2009 Copyright © 2009 ASUSTeK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (“ASUS”). Product ...

About this guide......................................................................................... vii ITX-220 specifications summary.............................................................. viii Chapter 1: Pr ...

2.3.5 System Information.......................................................... 2-6 2.4 Advanced menu............................................................................ 2-7 2.4.1 JumperFree Configuration............................................... 2-7 2.4.2 TPM Configuration........................................................... 2-7 2.4.3 US ...

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rul ...

before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. • Before connecting or removing signal cables fro ...

complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. NOTE: Tips and additional information to help you complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. Typography Bold text Indicates a menu or an item to select. Italics Used to emphasize a word or a phrase. Keys enclosed in the less-than an ...

(continued on the next page) CPU Integrated Intel® Celeron® 220 processor Supports Intel® EM64T technology Chipset Northbridge: Intel® 945GC Southbridge: Intel® ICH7 CPU Fan Fan Dimensions: 40 x 40 x10mm Rated Speed: 5000 ± 10% RPM Rated Voltage: DC 12V Maximum Air Flow: 5.57 CFM Noise Level: 25.3 dBA (Max. 27.5 dBA) Front Side Bus 533 MHz Memory Dual channel memory architecture - 2 x 240-pin DIMM sockets support ...

*Specifications are subject to change without notice. Internal connectors 1 x USB connector supports additional 2 USB ports 1 x Speaker connector 2 x Serial ATA connectors 1 x Chassis fan connector 1 x Chassis intrusion connector 1 x CPU fan connector 1 x TPM connector (optional) 1 x System panel connector 1 x High definition front panel audio connector 1 x 24-pin EATX power connector 1 x 4-pin ATX 12V power connector BIOS ...

Thank you for buying an ASUS® ITX-220 motherboard! Before you start installing the motherboard, and hardware devices on it, check the items in your motherboard package. Refer to page ix for the list of accessories. 1.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard ...

1.2.2 Layout contents 1.2 Motherboard overview 1.2.1 Motherboard layout Place four screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard. Ensure that you install the motherboard into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis. Place this side towards the rear of ...

The motherboard comes with an onboard Intel® Celeron® 220 processor and a specially designed CPU heatsink and fan. Ensure that the CPU fan cable is connected to the onboard CPU_Fan connector. ...

1.4.2 Memory configurations You may install 512MB, 1GB and 2GB unbuffered non‑ECC DDR2 DIMMs into the DIMM sockets. • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for the single-channel operation. • Always install DIMMs with the same CAS l ...

DDR2-533 MHz capability Size Vendor Part No. SS/DS CL Chip No. Chip Brand DIMM socket support (Optional) A* B* 512MB Corsair VS 512MB533D2 SS N/A 64M8CEDGPS0900805 Corsair · 512MB Corsair VS 512MB533D2 DS N/A MIII0052532M8CEC Corsair · · 1024MB Corsair VS1GB533D2 DS N/A 64M8CFEGQIB0900718 Corsair · 512MB Elpida EBE51UD8ABFA-5C-E SS N/A E5108AB-5C-E Elpida · 512MB Kingmax KLBC28F-A8KB4 ...

1.5 Expansion slot In the future, you may need to install expansion cards. The following sub‑sections describe the slot and the expansion cards that it supports. Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 1.5.1 Installing an expansion card To install an expansion card: 1. Before installing the expansion card, read th ...

This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default position. Removin ...

1.7 Connectors 1.7.1 Rear panel connectors 1. PS/2 mouse port (green). This port is for a PS/2 mouse. 2. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to the table below for the LAN port LED indications. LAN port LED indications ACT/LINK LED SPEED LED Status Description Status Description OFF No link OFF 10 Mbps connection ORANGE Linked ORANGE 100 Mbps co ...

available for connecting USB 2.0 devices. 7. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 8. Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other VGA-compatible devices. 9. COM port. This port is for pointing devices or other serial devices. 10. PS/2 keyboard po ...

2. USB connector (10-1 pin USB56) This connector is for a USB 2.0 port. Connect the USB module cable to this connector, then install the module to a slot opening at the back of the system chassis. This USB connector complys with USB 2.0 specification that supports up to 480 Mbps connection speed. Never connect a 1394 cable to the USB connector. Doing so will damage the motherboard! The USB module cable is purchased sepa ...

system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! 4. CPU and chassis fan connectors (3-pin CPU_FAN, 3-pin CHA_FAN) The fan connectors support cooling fans of 350 mA~2000 mA (24 W max.) or a total of 1 A~3.48 A (41.76 W max.) at +12V. Connect the fan cables to the fan connectors ...