Master&Dynamic MW65 Operation & User’s Manual
Text of the manual
Master & Dynamic is a New York City-based premium audio company with a
deep passion for building technically sophisticated sound tools. Designed to
be modern yet timeless, our products utilize only the finest materials and
are engineered to last, creating the perfect balance of aesthetics, strength,
comfort, and exceptional sound.
NEVER SOUND THE SAME
USER M
1. Premium Leather Headphone
Band with Lambskin Interior
2. Replaceable Memory Foam
Ear Pads with Lambskin Covering
3. Forged Aluminum Components
4. 3.5mm Passive Audio Input
5. Stainless Steel Adjustment Arm
6. USB-C Input
7. Active Noise-Cancelling Button
8. Dual Microphones
9. Get Help on-the-go from your
Google Assistant
10. Headphone Controls
(See Page
• Adjust to find optimal fit.
• Rotates for comfort around neck
ADJUSTABILITY, FIT AND COMFORT
MW65 Active Noise-Cancelling Wireless Over-Ear Heaphones
USER MANUAL
3
MW65 Active Noise-Cancelling Wireless Over-Ear Heaphones
USER MANUAL
4
Pairing Indicator
Active Noise Canceling
(ANC) Button
Bluetooth Pairing Switch
Power On
Power Off
PRESS to switch
between modes
Low
Battery Level
Indicator
Med
High
Charging
Fully Charged
Vol +
LONG PRESS:
receive your
Google Assistant
notifications
Vol -
LONG PRESS:
Stop Google
USB-C
Pla
• Silde to ON position.
At startup battery status is displayed (LOW/MED/HIGH)
• To charge, plug in the USB-C Connector and connect to a
USB-C port (or USB-A port using the included adaptor)
CHARGE
• A solid orange light indicates charging and a solid
green light indicates a full charge when the USB cable
is connected.
Charging
Fully Charged
ACTIVE NOISE-CANCELING (ANC) MODES
The MW65 features 2 Active Noise-Cancelling (ANC) modes for clear,
expansive sound in any environment.
High - Airplanes, City Streets etc.
Low - Lower noise or windy environment
Off - No noise-canceling needed
Get help on-the-go from your Google Assistant. Your MW65 is optimized
for the Google Assistant out of the box.
ANDR
• To remove ear pads: gently pull the earpads from the top. The snaps
will release.
• To re-attach ear pads: hook the 2 catches into the slots at the bottom of
the earcup. Gently push the earpad against the earcup, ensuring all the
snaps are secured
ACCESSORIES
REPLACING EAR PADS
MW65 Active Noise-Cancelling Wireless Over-Ear Heaphones
USER MANUAL
7
1
Clean ear pads and headphones with soft, slightly damp cloth. Do not soak,
submerge or allow moisture to enter near the drivers or cable jacks. Ear pads
and cables can be purchased if they are worn out at: www.masterdynamic.com
Do not drop, sit on, or allow the headphones to be exposed to water, moisture,
or temperature extremes.
It is recommended that you r