marposs Merlin Software Manual

INDEX 1 INTRODUCTION......................................................................... 2 INITIAL SETTINGS...................................................................... 3 PROGRAMMING......................................................................... 4 BATCHES........................................................................... ...

1 INTRODUCTION Designed for simple measuring applications up to 16 sensors/measurements and basic statistics analysis, Merlin represents a new concept of gage computer using the same technologies created for PDA and portable electronics, for data collection from traditional or wireless measuring devices. The Merlin software is based on Microsoft® .Net ...

CANCEL: this icon appears in all programming windows and it permits to exit without saving the data. ENTER: it permits the user to confirm data entered via the virtual keypad. The menu can be used to access all the functionalities. Switch between ADMINISTRATOR and OPERATOR user levels Access to configuration phase Access to programming phase Access to ...

Access to sub-menu where it is possible to change the LANGUAGE Access to MEASUREMENT DEVICES MAP page where it is possible to insert additional devices (See chapter 2) Access to I/O LINES MAP page that provides a rapid overview of all the I/O signals associated with the connected devices (See paragraph 2.7). Access to LIST OF SERIAL PROTOCOLS page that ...

Exit from the measuring software. Access to PART PROGRAM LIST (See paragraph 3.2). Access to MASTER SET LIST (See paragraph 3.1). 1.4.1 Programming menu NOTE: Available languages: English, Italian, German, French, Japane- se, Spanish, Portuguese, Chinese, Dutch, Swedish, Polish, Hungarian, Romanian, Czech, Korean and Turkish. For Chinese, Korean and Ja ...

The operator can enter data by using the virtual keyboards that vary in their format depending on the language and type of data to be entered or modified. Alphanumerical ENTER icon to confirm the data that have been entered. 1.5 The virtual keyboards NOTE: It is also possible to connect a USB keyboard to Merlin, or a laser scanner (for reading barcodes ...

When the operator selects the language from the general Menu, the software opens the corresponding keyboard and handles all the communications with the IME and selects the appropriate O.S. settings for the specific input language. In the case of Japanese, it is possible to select between 3 different keyboard types: Hiragana, Katakana, Romanji, in addit ...

To enter text in Chinese, select the last keyboard on the list, type the desired characters and tap Space/Ok to display the list of candidates. The green arrows located next to the text box, can be used to scroll left and/or right through the list. Once the desired letter has been entered, tap ‘Space/Ok’ to confirm the selection, tap again to clos ...