Lievers P14-E Operation And Parts Manual

HAND HELD POKER VIBRATOR P14-E LIEVERS HOLLAND Groot Mijdrechtstraat 68 – 3641 RW Postbus 103 - 3640 AC Mijdrecht (NL) Phone.: 0031 – (0)297-231900 / Fax: 0031 – (0)297-231909 E-mail: [email protected] / Internet: www.lieversholland.com ...

CONTENT 1. PREFACE ................................................................................................................................................................ 3 2. INTRODUCTION ........................................................... ...

1. Preface This manual has been written to help you operate and maintain the poker vibrator P14E safely. This manual is intended for dealers and operators of the poker vibrator P14E and contains useful instructions for use, maintenance and repair. These ins ...

2. Introduction Intended use A hand held poker vibrator is a machine with a vibrating, steel bottle, for compacting concrete. The poker vibrator P14E consists of an electrical motor in an impact and shock proof plastic motor housing and a flexible poker vib ...

3. Technical specifications Technical details For technical details of the handheld poker vibrator P14E, we also refer to the label on page 3 of this manual. Measurements motor housing Length 280 millimetres Width 180 millimetres Height 180 millimetres Ele ...

Motor protection Impact and shockproof plastic motor housing. Poker vibrator connection Quick release. Sound pressure level db(A) 79 (outside, 1 metre distance, ear height). Weighted effective value of acceleration Determined according to ISO 5349 part 1: ...

4. Safety Explanation of the used safety symbols Figure 5: safety symbols ENSURE THAT ALL SYMBOLS – ON THE POKER VIBRATOR – CAN ALWAYS BE CLEARLY READ . 4.1 Safety aspects The following safety aspects apply to the machine:  Safety symbols are present ...

 Disconnect the electrical supply to the poker vibrator, before you start to clean or maintain the poker vibrator  Check whether the electrical source complies with the local valid regulations: use an electrical source which is provided with an earth ...

5. Use Read the safety aspects and operating instructions before use. If aspects are not clear to you, then contact the manufacturer. For the location and description of the poker vibrator’s parts, which are mentioned in the text, we refer to figure 3 in ...

5.2 Operation and application of the poker vibrator 1) Check that the flexible poker vibrator is correctly connected to the motor drive’s spindle 2) Place the motor housing in the direct vicinity of where you are going to compact the concrete. 3) Check ...