Phytec phyCORE-ADuC812 Hardware Manual

phyCORE-ADuC812 Hardware Manual Edition February 2003 ...

In this manual are descriptions for copyrighted products that are not explicitly indicated as such. The absence of the trademark () and copyright () symbols does not imply that a product is not protected. Additionally, registered patents and trademarks are similarly not expressly indicated i ...

 PHYTEC Meßtechnik GmbH 2003 L-461e_3 Preface ......................................................................................................1 1 Introduction .........................................................................................3 1.1 Block Diagram............................................................. ...

8 Real-Time Clock RTC-8563 (U12)...................................................53 9 Reset Controller (U6)........................................................................54 10 Remote Supervisor Chip (U7)..........................................................55 11 Battery Buffer...... ...

 PHYTEC Meßtechnik GmbH 2003 L-461e_3 Index of Figures and Tables Figure 1: Block Diagram phyCORE-ADuC812 ..........................................6 Figure 2: View of the phyCORE-ADuC812 (Top View) ............................7 Figure 3: View of the phyCORE-ADuC812 (Bottom View).......................8 Figure 4: Pinout of the phyCO ...

Figure 24: Pin Assignment of the DB-9 Socket P1A as RS-232 (Front View)...............................................................................73 Figure 25: Pin Assignment of the DB-9 Socket P1B (Front View).............74 Figure 26: Pin Assignment of the DB-9 Plug P2A (CAN Transceiver on p ...

 PHYTEC Meßtechnik GmbH 2003 L-461e_3 Table 16: Address Register of the Address Decoder..................................38 Table 17: Mask Register of the Address Decoder ......................................39 Table 18: Example of Address Decoder Functions ....................................40 Table 19: Control Register 2 of the ...

Table 38: Improper Jumper Settings for the CAN Plug P2A (CAN Transceiver on Development Board with Galvanic Separation)..................................................................................81 Table 39: Jumper Configuration for DB-9 Plug P2B as RS-485 Interface.......................... ...

1 Preface This phyCORE-ADuC812 Hardware Manual describes the board’s design and functions. Precise specifications for the Analog Devices ADuC812 or ADuC824 microcontroller can be found in the enclosed microcontroller Data Sheet/User’s Manual. If software is included please also refer to additional doc ...

PHYTEC products fulfill the norms of the European Union’s Directive for Electro Magnetic Conformity only in accordance to the descriptions and rules of usage indicated in this hardware manual (particularly in respect to the pin header row connectors, power connector and serial interface to a h ...