Michell Instruments Condumax II Operation & User’s Manual
Text of the manual
Please fi ll out the form(s) below for each instrument that has been purchased.
Use this information when contacting Michell Instruments for service purposes.
Analyzer
Code
Serial Number
Invoice Date
Location of Instrument
Tag No
Analyzer
Code
Serial Number
Invoice Date
Location of Instrument
Tag No
Analyzer
Code
Serial Number
Invoice Date
Location of Instr
© 2018 Michell Instruments
This document is the property of Michell Instruments Ltd. and may not be copied or
otherwise reproduced, communicated in any way to third parties, nor stored in any Data
Processing System without the express written authorization of Michell Instruments Ltd.
Condumax II
For Michell Instruments' contact information please go to
www.
Condumax II User’s Manual
iv
97081 Issue 28.1, July 2018
Contents
Safety ...............................................................................................................................vii
Electrical Safety .................................................................................................................vii
Pressure Safety ...
Condumax II User’s Manual
Michell Instruments
v
3.10
Adjusting and Viewing System Variables ................................................................. 32
3.10.1
Enter Password ........................................................................................... 32
3.10.2
Variable Pages ..........................................................
Condumax II User’s Manual
vi
97081 Issue 28.1, July 2018
Appendices
Appendix A
Technical Specifi cations ..............................................................................47
A.1
Mounting Drawing .......................................................................48
A.2
Flow Diagram ...........................................................
Condumax II User’s Manual
Michell Instruments
vii
Safety
This manual contains all the required information to install, operate and maintain the Condumax II.
Prior to installation and use of this instrument, this entire manual should be read and understood.
Installation and operation of this product should be carried out by suitably competent personnel only
Condumax II User’s Manual
viii
97081 Issue 28.1, July 2018
Abbreviations
The following abbreviations are used in this manual:
AC
alternating current
atm
pressure unit (atmosphere)
barg
pressure unit (=100 kP or 0.987 atm) gauge
°C
degrees Celsius
°F
degrees Fahrenheit
DC
direct current
dp
dew point
EU
European Union
g/m3
grams per cubic meter
HCdp
hydroc
Condumax II User’s Manual
Michell Instruments
1
INTRODUCTION
1
INTRODUCTION
1.1
General
The Condumax II is designed for continuous, automatic measurement of the hydrocarbon
dew point and water dew point of processed natural gas. It is the result of more than 30
years' experience in the supply of analyzers to the worldwide oil, gas and petrochemical
industr