SCHUNK VERO-S Assembly And Operating Manual

VERO-S Setup cart Assembly and operating manual Superior Clamping and Gripping ...

Imprint Copyright: This manual remains the copyrighted property of SCHUNK GmbH & Co. KG. It is solely supplied to our customers and operators of our products and forms part of the product. This documentation may not be duplicated or made accessible to third parties, in particu- lar competitive companies, without our prior permi ...

01.01|Setup cart |en 3 Table of contents 1 General .................................................................................................................... 4 1.1 Warnings ................................................................................................................... 4 1.2 Applicable documents .............. ...

General This operating manual is an integral component of the product and contains important information on safe and proper assembly, commissioning, operation, care, maintenance and disposal. This manual must be stored in the immediate vicinity of the product where it is accessible to all users at all times. Before using the pr ...

5 NOTICE Material damage Information about avoiding material damage. Applicable documents General terms of business Catalog data sheet of the purchased product The documents listed here, can be downloaded on our homepage www.schunk.com 1.2 ...

6 01.01|Setup cart |en Basic safety notes Risks to persons and property may arise from incorrect handling, assembly and adjustment of this product if these instructions are disregarded. Report breakdowns and damages as soon as you detect it and repair immediately, so as to keep the extent of damage as small as possible and to avoid risking ...

01.01|Setup cart |en 7 WARNING Risk of injury due to falling parts when setting up, operating, dismantling, and transporting the setup cart. Parts that have not been properly secured or incorrectly positioned parts can come loose and fall down. • Use suitable lifting equipment and means of transport. • Position the devices and tools s ...

8 01.01|Setup cart |en CAUTION Risk of injury from parts which are under spring force (drawer locking, drawer pull-out safety device) • Wear protective gloves during assembly, operation and disassembly. CAUTION There is a risk of crushing when loading and unloading the setup cart. • Use suitable lifting equipment. • Wear personal p ...

01.01|Setup cart |en 9 • Always fully close the drawer after loading or unloading - drawer locking must be activated. • Before opening a drawer, make sure the remaining drawers are fully closed (locked). • Never use force when opening a drawer. Fully press in the push-button when deactivating the drawer lock. • Observe the perm ...

10 01.01|Setup cart |en Monitoring the behavior of personnel The operator must at least occasionally check that the personnel are behaving in a safety-conscious manner and are aware of the potential hazards. Danger signs The operator must ensure that the signs concerning safety and hazards on the machine where the setup cart is used are cl ...