TM Time TT100 Instruction Manual

Digital Ultrasonic Thickness Testers Time TT100 TT100 is a hand held microprocessor controlled thickness gauge specifically designed for measuring the thickness of metallic and non-metallic materials e.g. aluminium, titanium, plastics, ceramics, glass and other good ultrasonic wave-conducting as long as the material has parallel top and bottom surfaces. With uses in many areas of industry TT100 can perform precise measurements on various types of raw materials, components parts, and assembled machinery. It can also be used to monitor all types of pipes and pressure vessels for loss of thickness due to corrosion. TT100 is very easy to use, after a simple calibration to a known thickness or sound velocity, the gauge will give fast and accurate readings in millimetres. Sound velocities for 5 different materials can be pre-set and 10 thickness readings can be stored in the memory. Specifications Material : Metallic & Non-Metallic Measuring units : mm Range (probe dependant) : 1.0 to 225.0 mm Frequency : 5 MHz Accuracy : +/-1% of Material Thickness + 0.1 mm Display : 4 digit LCD Resolution : 0.1 up to 99.9 mm Memory : 10 readings Sound velocity range : 1000 to 9999 m/sec RS232 : no Probe Tip diameter : 12 mm Sound Velocity : 5 Preset Sound Velocities Pipe Diameter Limits : 20 mm x 3 mm Auto power off : yes Working Temp. : -5 to 40 deg C Power Supply : 2 x 1.5 AA Alkaline Relative Humidity : < 90% Alarm limit setting : no Surface Temperature : < 60 deg C Battery Life : 250 hours per battery set Non-linear Automatic Compensation Dimensions : 126 x 68 x 23 mm Indication of Coupling Status and low Voltage Weight : 170g Optional probes Type of Probe Working Measuring Minimum Characteristic Frequency Thickness Size of Range Measuring Pipe 5PØ10 5MHz 1.2 - 225 Ø20 x 3 Straight Probe 5PØ10/90˚ 5MHz 1.2 - 225 Ø20 x 3 Right Angle Probe 7PØ6 7MHz 0.75 - 60 Ø15 x 2 For testing thin materials SZ2.5P 2.5MHz 3 - 300 For testing thick materials with Rough Surfaces ZW5P 5MHz 4 - 80 High Temp up to 300 deg C Standard Package � Plastic case – foam lined with Combination Lock � 2 Probes – Straight & Right angle – both 5 MHz � Coupling Agent – (Vaseline or Grease Hand Cleaner will also give accurate readings) � Instruction Manual http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za Supplied by : Test and Measurement Instruments C.C. www.instrumentsgroup.co.za Email: [email protected] Tel: 0027 (0)11 683 4365

STANDARD VELOCITY IN MATERIALS FOR ULTRASONIC THICKNESS GAUGES METALS m/s m/s A ALUMINIUM 6 320 - 6 400 M MOLYBDENUM 6 250 - 6 300 ALUMINIUM 2024-T4 6 380 NICKEL 5 480 - 6 040 ASBESTOS CEMENT 2 200 PLATINUM 3 960 B BERYLLIUM 12 890 S SILVER 3 600 - 3 700 BISMUTH 2180 SILVER - GERMAN 4 750 BORON CARBIDE 10 920 MOTOR OIL (SAE 30) 1 750 BRASS 3 800 - 4 700 STEEL, MILD 5 900 - 6 100 C CADMIUM 2 770 - 2 800 STEEL, CASTING 5 850 CAST IRON 3 500 - 5 600 STEEL, STAINLESS (AUSTENITIC) 5 660 - 6 120 " " (MODULAR GRAPHITE) 5 600 STELLITE 7 050 CAST GREY MIDDLE 4 600 T TIN 3 300 - 3 330 CONSTANTAN 5 230 TITANIUM 5 900 - 6 100 COPPER 4 650 - 4 720 TUNGSTEN CARBON 6 650 CHROMIUM 6 200 TUNGSTEN 5 180 - 5 400 G GOLD 3 200 - 3 250 URANIUM 3380 INCONEL 5 820 W WATER 1 470 IRON 5 890 - 5 930 WOLFRAM 5 460 LEAD 1 960 - 2 400 ZINC 4 170 - 4 320 M MANGANESE 4 660 - 4 700 ZIRCALOY 2 4 700 MAGNESIUM 5 770 - 5 840 ZIRCONIUM 4 650 MERCURY 1 450 NON-METAL (m/s) A ACRYLIC 2 870 N NYLON 2 600 - 2 690 ACRYLIC RESIN 2 730 - 2 870 OIL (SAE 30) 1 740 AIR 330 P PARAFFIN WAX 2 200 ALUM. OXIDE 8 700 PERSPEX 2 860 C CERAMIC (MACOR) 5 631 PHENOLIC 1 400 CLAY 2 600 PLEXI GLASS 2 700 CONCRETE 3 650 - 4 270 POLYAMIDE 2 380 DIAMOND 17 500 POLYETHYLENE 1 900 - 2 400 DIESEL OIL 1 250 POLYURETHANE 1 780 - 1 900 EPOXY RESIN 2 650 POLYSTYRENE 2 340 - 2 400 G GLASS (FLINT) 4 260 PORCELAIN 5 600 - 5 900 GLASS (CROWN) 5 260 - 6 120 PVC 2 400 GLASS (QUARTZ) 5 570 Q QUARTZ X CUT 5 740 GLASS (WINDOW) 6 800 QUARTZ FUSED 5 980 GLYCERINE 1 920 QUARTZ GLASS 5 640 ICE 3 980 R RUBBER (BUTYL) 1 900 H HI-DENSITY POLYETHELENE 2 220 - 2 300 RUBBER (SOFT) 1 480 (GREY & WHITE NOT BLACK) RUBBER (VULC.) 2 300 M METHYLENE-OXIDE 9 980 S SILICONE RUBBER 948 MONEL 5 360 - 5 400 TEFLON 1 350 - 1 520 MOTOR OIL (SAE 30) 1 750 WATER 1470 N NEOPRENE 1 600 NB NOTE : THIS SCHEDULE IS ONLY A GUIDE http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za http://www.instrumentsgroup.co.za Supplied by : Test and Measurement Instruments C.C. www.instrumentsgroup.co.za Email: [email protected] Tel: 0027 (0)11 683 4365