RoutingJigs Adjustable Hinge Jig Instruction Leaflet

Adjustable Hinge Jig Adjustable Adjustable 50mm - 127mm (2” - 5”) 6.5 - 35mm Hinge sizes possible � Three adjustable hinge apertures. � For hinges 50mm(2”) - 127mm(5”) x 6.5mm - 35mm. � Comes in two parts for easy storage. � Based on a 2 metre door, the hinge positions are 6” from top, 9” from base, and middle. � En ...

1. Assemble the Hinge Jig 1. Assemble the Hinge Jig The two individual parts assemble together by a connecting plate. Use the keyhole slot to capture the head of the screw and pull both parts of the jig together in the direction shown in the diagram. Tighten the screw to secure the jig together. Assemble the 3 pairs of aluminium bushes o ...

3. Set up the Hinge Depth 3. Set up the Hinge Depth 1. Loosen the depth datum by hand by turning(do not need to use a hex key) 2. Place the knuckle of the hinge in the slot as shown in the diagram, and push in the direction shown. 3. Move the depth datum so it butts up against the edge of the hinge. 4. Tighten the depth datum by hand by ...

Rout hinge Recesses in Door cont... Rout hinge Recesses in Door cont... 6. Secure the jig to the door with bradawls. 7. Set your router to the depth or slightly deeper than the hinge - refer to your routers manual for instructions on how to do this. 8. Continue to rout the three apertures into the door. 9. Remove the bradawls and remove ...