AT&T E2912 Operation & User’s Manual

answering system with caller ID/call waiting ...

Serial #: (found on the bottom of the telephone base) Purchase date: Place of purchase: Congratulations on purchasing your new AT&T product. Before using this AT&T product, please read the Important safety instructions on pages 55-57 of this manual. Please thoroughly read the u ...

for easy instructions. You must install and charge the battery before using the telephone. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268. CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these ins ...

Parts checklist.......................................4 Telephone base installation............5 Battery installation & charging.............7 Installation options.............................8 Belt clip & optional headset.............10 Telephone operation Basic operation....................... ...

While using menus, press to cancel an operation, back up to the previous menu, or exit the menu display. While predialing, press to delete digits (page 11). Quick reference guide TONE MUTE DELETE REDIAL PAUSE MUTE������� /DELETE While on a call, press to mute microphone (page 15). Whi ...

Telephone base CHARGE/IN USE Flashes when another telephone on the same line or one of the handsets is in use. Flashes when the answering sys- tem is answering an incoming call. Flashes while an incoming call is ring- ing. On steady when the handset is properly positioned to charge in the telephone base. HANDSET LOCATO ...

your telephone for warranty service. Check to make sure the telephone package includes the following: Telephone base with mounting bracket installed Cordless handsets Belt clips for cordless handsets Charger for cordless handset Batteries for cor ...

Choose a central location close to a telephone jack and an electrical outlet not connected to a wall switch. The telephone base can be placed on a flat surface or mounted on a standard wall plate. For optimum range and better reception, place the telephone base in a high and open location. Avoid placing the telep ...

DSL filter (Optional for DSL users, see number four in the note section below.) Telephone base installation NOTES: 1. Use only the power adapter supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268. 2. Be ...

After installing the battery, you may be able to make and receive short calls. For best performance, place the handsets in the telephone base or the charg- er and charge for 16 hours before use. You can keep the battery charged by returning the handsets to the telephone base or the charger after use. When th ...