NovaStar J6 Operation & User’s Manual

User Manual Multi-Screen Splicing Processor J6 Rev1.0.1 NS160110162 Xi’an NovaStar Tech Co., Ltd. ...

Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice. Any pr ...

1.1 System Architecture ....................................................................................................................................... 2 1.2 Software Installation .......................... ...

event of breakdowns, non-professionals are not allowed to disassemble it for maintenance without permission. Please contact the after-sales department of NovaStar timely. High voltage danger: The operating voltage range of this product is 10 ...

featuring powerful image processing. Multiple video inputs can be overlapped and displayed on a display system composed by 4 screens after each of the input is scaled. J6 supports a wide range of inputs which can be spliced into a bigger picture. Ba ...

① Power switch ON/OFF ② Window buttons WIN1-WIN6, press a button to enter the relevant menu of window properties for quick settings.  A window is opened when its button indicator is on.  A window is closed when its button indicator is off.  Hold down the window button to close the window on the ...

 PRESET: Press the button to enter the “Preset Recall” menu. 16 presets are available for users to use, save, delete, etc.  TEST: Hold down the button to enter the test pattern settings menu.  OSD: Switch for loading images or texts. Prestored images or texts can be overlapped and displayed.  Fn (TAKE ...

DVI1-DL/PGM1 DVI1 output This interface works as PGM1 output when system mode is switcher, and as DualLink out1 when output mode is set to DualLink. DVI2/PGM2 DVI2 output This interface works as PGM2 output when system mode is switcher, and is invalid when o ...

Please refer to the interface introduction in previous chapter to connect hardware devices (Please turn the power off before connecting signals). J6-Splicer Computer Camera Power Input Genlock Source Computer Computer Camera LED Display J6-Switcher Computer Camera Power Input Genlock Source Computer Computer Camera Mon ...

After startup, the home screen on the LCD panel is shown as below: A / / Pure color: The signal source is in use and signals are available. Semitransparent: The signal source is not in use and signals are available. Transparent: The signal source is not in use and no signal is available. B Transparent: The window has inp ...