Rhino-Rack RCP63-BK Manual 

Maximum carrying capacity: 75kg (165lbs) evenly distributed over crossbars when mounted on the strongest section of the roof. Please refer to your vehicle manufacturers handbook for maximum roof loading. Always use the lower of the two fi gures. Note: Be sure to check the Rhino-Rack website to see if you have the latest version of instructions before beginning. Advisory: It is essential that all bolt connections be checked after 48hrs from wh ...

RCP63-BK Base Kit Instructions Apply masking tape to the approximate working area on the vehicle. 1 2 Parts List Item Components Qty Part No. 1 Short Fixed Mount Rotation Block 2 M835 2 Short Fixed Mount Base Cover 4 M836 3 Short Fixed Mount Base 2 M834 4 Short Fixed Mount Flat Rubber 2 M837 5 Nutsert 4 H059 6 M6 x 30mm Hex Hex Setscrew 2 B202 7 M6 x 25mm Torx Screw 4 B244 8 M6 Curved Nut 2 N060 9 M6 Spring Washer 6 W004 10 M6 x 12.5 Flat Washe ...

RCP63-BK Base Kit Install crossbars as per crossbar individual instructions. RVL crossbars shown as example only. 11 Be sure fi xtures are secure before use. Assemble the short mounts as shown. 7 Short fi xed mount base Short fi xed mount rubber Place the short fi xed mount rotation block onto the assembly. 8 Short fi xed mount base rotation block M6 curved nut Using a nutsert tool, install the nutserts into the drilled holes on the vehicl ...