Quark-Elec QK-W017 Application Note

https://www.quark-elec.com 1 of 22 2015 V1.1 QK-W017 WiFi Remote Control Gateway — WiFi temperature/humidity data logger & remote controller Features  Control and store heating/cooling settings for up to five individual zones  Turn electronic devices ON/OFF from any location via the Internet  Monitor environmental tempe ...

https://www.quark-elec.com 2 of 22 2015 V1.1 Applications  Environmental monitoring systems for industrial and distribution sites  Greenhouse temperature control  Home automation  Boiler and electrical appliance control  Plant maintenance  Security systems  Farm irrigation  PLC and automation systems  QK ...

https://www.quark-elec.com 3 of 22 2015 V1.1 Order information Part No Description QK-W017 WiFi remote control gateway QK-S001T Wireless temperature control terminals Up to 5 wireless T/H control terminals(QK-S001T or QK-S001H) to be paired with QK-W017 QK-S001H Wireless temperature and humidity control terminal Contents CONTENTS. ...

https://www.quark-elec.com 4 of 22 2015 V1.1 INTRODUCTION The QK-W017 is a temperature and humidity monitoring WiFi gateway which communicates either directly with your phone or tablet or through an access point (router) to control and oversee up to five independently adjustable environment zones. The main gateway unit works with ...

https://www.quark-elec.com 5 of 22 2015 V1.1 1 SETUP 1.1 Power up The QK-W017 WiFi remote control gateway should be powered by a 12V DC 1.0A supply. Connect the power supply to a mains power socket, switch on the power supply and the red LED should light up and stay on. The horizontal bars on the display will flash until initialis ...

https://www.quark-elec.com 6 of 22 2015 V1.1 Figure 3 Connecting to WiFi168 Connect the mobile phone or tablet to ‘WiFi168’ with ‘88888888’ as the default password. The red LED will remain lit up once the connection is made. Should ‘WiFi168’ not be found on the tablet or the mobile phone, please go to ‘Reset QK-W017� ...

https://www.quark-elec.com 7 of 22 2015 V1.1  The operator can now scan the available WiFi networks to find and connect to ‘WiFi168’. Once the tablet or the mobile phone is connected to the ‘WiFi168’ network, open the APP and click the ‘+’ at the top right of the screen. A confirmation message ‘register OK’ will ...

https://www.quark-elec.com 8 of 22 2015 V1.1 1.4 Station (infrastructure) mode When connecting QK-W017 into an existing WiFi network, operators should follow the steps below to set it to operate in station mode:  Power off QK-W017.  Press and hold the ‘Reset’ button, then power up QK-W017. After the red LED has been on f ...

https://www.quark-elec.com 9 of 22 2015 V1.1  SSID name - input the SSID name (sometimes called the AP name) to which QK-W017 will connect. It is important to ensure that no blank spaces are inadvertently introduced, and that case sensitive names are checked. Press ‘Save’ and wait for the Gateway to respond (SSID Name is xx ...

https://www.quark-elec.com 10 of 22 2015 V1.1 device has been discovered and saved, the red ‘x’ after ‘Control Panel’ will turn into a green ‘√’ as shown; Figure 7 Welcome page with paired unit(s) 2.2 Pairing with T/H control terminal QK-W017 can work with up to five QK-S001 wireless temperature/humidity terminals to ...