Pacific Sun Kore 7th Network Setup Manual

Text of the manual

Ultimate dosing station

WiFi Network Setup User Manual ver. 2.2 Android / iOS interface www.Pacific-Sun.eu

Kore 7th Manual / kHLab Edition

Wi-Fi Network Protection Setup and Connection to Kore 7th 1. Find your Kore7th doser on your WiFi network list and click Connect to this network. Select Connect to the Kore 7th Wi-Fi Network. 2. Connecting to the Kore 7th Wi-Fi Network. 3. Open your Internet Browser (Chrome, Firefox, Safari, IE or other) and type the Ko

Kore 7th Manual / kHLab Edition

4 1 2 3 WiFi Soft-AP Configuration Soft-AP-AP SSID allows to change the name of your doser WiFi network name. Soft-AP Password allows to setup password for Kore7th WiFi network access. Soft-AP Auth Mode allows to change authentication mode (WiFi network Encryption). Change Soft-AP settings allows to save settings. 2 1 3

Kore 7th Manual / kHLab Edition

6. You can change the Kore7th doser WiFi network name to your preferred name in the Sof-AP SSID field. Note: You can leave the default manufacture name. 7. Setup password to secure your Kore7th doser WiFi network in the Sof-AP Password field. Important! Password must be at least 8 characters long with capital letters an

Kore 7th Manual / kHLab Edition

9. Save all settings Click Change Soft-AP settings! All the settings will be saved. Now you can close your Internet Browser. Your computer will be disconnected from this Kore7th doser WiFi network. 10. Navigate back to your WiFi network list, select your Kore7th doser WiFi network and click Connect. 11. Type your Kore7t

Kore 7th Manual / kHLab Edition

12. You should see: Connecting to your Kore7th …. ß 13. Now you are Connected to your Secure Kore7th Doser WiFi network. Important! You should see the Security Type: WPA2-PSK. If NOT, you have to go back to the Kore7th doser WiFi network settings web browser page and repeat the above steps. 14. Open again the Kore 7t

Kore 7th Manual / kHLab Edition

15. Go to WiFi Station settings. Under WiFi Association you should see Scanning for available home WiFi networks. Start Scanning if didn’t start. 16. Select your Home WiFi network under Network SSID. Type in your Home WiFi network in the password field under the WiFi password, if applicable. Next Click Connect! 17. Wa

Kore 7th Manual / kHLab Edition

18. The Connection is completed. Now your Kore7th doser is connecter to your Home WiFi network on a new IP address 192.168.1.227. Note: Your IP address can be different. This is just an example. Most likely each network setup will give a different IP address. Take a note of this NEW IP address (your Kore7th dising statt

Kore 7th Manual / kHLab Edition

21. Connecting to your Home WiFi network …. 22. Now you are Connected to your Secure Home WiFi network. 23. Open again your Internet Browser (Chrome, Firefox, Safari, IE or other) and type the Kore7th doser NEW IP address 192.168.1.227 into the address field. If you are using IE, you might want to add http:// to the a

Kore 7th Manual / kHLab Edition

24. Go to WiFi Station settings and scroll down to Special Settings. Select option: Static IP Under Static IP address specify your NEW Kore7th IP address: 192.168.1.227 Important! When using Static IP you Kore7t IP address will not change after doser restart. 25. Start the “HW Virtual Serial Port” software. All con

More Pacific Sun Microphone system Owners Instructions: