AT&T 983 Operation & User’s Manual

Text of the manual

Product name: Two-line speakerphone

Serial #: (found on the bottom of the telephone base) Purchase date: Place of purchase: Congratulations on purchasing your new AT&T product. Before using this AT&T product, please read the Important product information on pages 26-27 of this manual. Please thoroughly read the user’s manual for all the featu

See page 5

for easy instructions. You must install the bat- tery before using the tel- ephone. For customer service or product information, visit our website at www.telephones. att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instruct

Quick reference guide .........................2

Parts checklist .........................................3 Before you install ..................................4 Battery installation ...............................5 Tabletop installation ............................6 Wall mounting .........................................8 Data port & opt

Lift the handset. Press

to dial the last number dialed (page 13). LINE 1, LINE 2 Press, then lift handset to make or answer a call on line 1 or 2 (page 12). CONFERENCE Press to enter three-way conference call (page 17). FLASH During a call, press to receive an incoming call if call waiting is activated (page 15). HOLD Press to

Save your sales receipt and original packaging in case it is necessary to ship

your telephone for warranty service. Check to make sure the telephone package includes the following: User's manual Quick start guide Telephone base with wall mount bracket attached. Handset Handset coiled

Choose a central location close to a telephone jack. The telephone base can be

placed on a flat surface or mounted on a standard wall plate. Avoid placing the telephone base too close to: • Excessive heat sources. • Excessive dust sources such as a workshop or garage. • Excessive moisture. • Extremely low temperature. • Mecha

Before using the telephone, you should install four AA alkaline batteries

(purchased separately). You can use the telephone without batteries to dial and receive calls. However, the line lights and the automatic redial feature will not work, and the speakerphone and optional headset may not work properly in all conditio

A single two-line wall jack

If there is a single two-line wall jack, use only the black (4-connector) line cord. Plug one end into the jack labeled L1 or L1/L2 on the back of the telephone. Plug the other end into the wall jack. Make sure the telephone line cord is plugged firmly into the telephone base and the wall j

More AT&T Telephone Owners Instructions: