AT&T SB67148 Operation & User’s Manual
Read Online
Read the AT&T SB67148 Operation & User’s Manual online using the built-in PDF viewer.
Key Pages of Document
for use with AT&T model SynJ SB67118/SB67138 ...
read the Important safety information on pages 76-77 of this manual. Please thoroughly read this user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (888) 915-2007. In Canada, dial 1 (866) 288-4268. Model number: Sy ...
Deskset Deskset power adapter Backup battery Handset with coiled cord installed User's manual User’s manual SynJ SB67148 DECT 6.0 4-line expansion deskset for use with AT&T model SynJ SB67118/SB67138 Quick start guide Quick start guide SynJ SB67148 DECT 6.0 4-line expansion deskset for use with AT&T model SynJ SB67118/SB67138 Additional directory card ...
User’s manual SynJ SB67148 DECT 6.0 4-line expansion deskset for use with AT&T model SynJ SB67118/SB67138 Getting started Quick reference guide...............................1 Installation.......................................................4 Deskset installation.....................................5 Backup battery installation.....................6 Backup battery charging..........................7 Add and register a deskset......... ...
Answer a PTT call...................................37 Convert a PTT call to an intercom call.............................................37 End a PTT call .........................................37 Directory About the directory...................................38 Capacity......................................................38 Exit the directory....................................38 Create director ...
NEW CALL indicator On when there are new or missed calls (page 46). Navigation keys While in menus, press DIR or CID to scroll through the menus, highlight items or to change settings. While entering names or numbers, press or to move the cursor to the left or right. While playing back messages, press once to repeat the message, or press twice to hear the previous message, or press to skip to the next message. /REPEAT During me ...
mute the microphone (page 24). During an incoming call, press to mute the ringer (page 22). VOL+/VOL- During a call, press to adjust the listening volume (page 24). During message playback, press to adjust the playback volume (page 58). Press to adjust the ringer volume (page 13). SPEAKER Press to turn on the speakerphone. Press again to turn it off (page 22). FLASH During a call, press to answer an incoming ...
Main menu Directory (pages 38-43) Call log (pages 44-48) Ringer setting (pages 13-14) Mailbox setup (pages 52-56) Deskset setup (pages 15-17) COVM (page 30) Speed dial setup (page 18) Customer support (page 18) • • • • • • • • Quick reference guide >Directory Call log Ringer setting Mailbox setup Back Select L1 L2 L3 L4 1:Deskset 1 3 Missed calls 10:01AM 11/23 Redial Menu L ...
The deskset should be placed on a flat surface. For optimum range and better reception, place the deskset near the main telephone base. Your product may be shipped with a protective sticker covering the deskset display - remove it before use. For customer service or product information, visit our website at www.telephones.att.com or call 1 (888) 915-2007. In Cana ...
visit our website at www.telephones.att.com, or call 1 (888) 915-2007. In Canada, dial 1 (866) 288-4268. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or ...
our website at www.telephones.att.com, or call 1 (888) 915-2007. In Canada, dial 1 (866) 288-4268. Press down the tab to open the battery compartment cover. 1. Place the battery in the compartment. Make sure the supplied battery with the label THIS SIDE UP faces up as indicated. 2. Align the cover flat against the batter ...
When the deskset loses power with the backup battery installed, the screen indicates the battery status (see table below) and displays Check AC power. When the backup battery is in low battery mode, the screen displays Low battery. The backup battery is fully charged after 16 hours of continuous charging. See the table on page 82 for battery operating times. The following table summarizes the battery charge indicat ...
The handset provided with the SynJ SB67118/SB67138 is already registered as Handset 1. Additional desksets are assigned numbers in the order they are registered (Deskset 2 to Deskset 10). You can register a maximum of 10 desksets/handsets, or 9 desksets/handsets and one cordless headset. You can add desksets (SynJ SB67148, purchased separately) to the SynJ SB67118/SB67138 at any time, but each new deskset must b ...
Register the deskset to your SynJ SB67138 telephone base On the SynJ SB67138 telephone base, press MENU/ENTER. Scroll down to Registration and press MENU/ENTER. Press MENU/ENTER again to select Register HS. The main telephone base screen shows Registering new device... Press the Start softkey on the unregistered deskset. The deskset shows Registering...Please wait. You hear a beep sound when the registration pro ...
You may need to deregister the deskset from the main telephone base if you already have ten registered devices and need to replace a deskset, or if you wish to change the assigned number of your registered devices. You must first deregister ALL the registered devices, and then register each device that you wish to use again individually. Please read carefully through all the instructions in this section before beginn ...
On the ����������������������������������� SynJ SB67138 ���������������������� telephone base, press MENU/ENTER. Scroll down to Registration and press MENU/ENTER. Scroll down to Deregistration and press MENU/ENTER. The main telephone base shows Deregister all device ...
2.5mm corded telephone headset (purchased separately). For best results, use a 2.5mm corded headset. To purchase a headset, visit our website at www.telephones.att.com, or call 1 (888) 915-2007. In Canada, dial 1 (866) 288-4268. See �pages 19-22 for instructions on using the corded headset with this deskset. Plug a 2.5 mm headset into the HEADSET jack on the side ...
Press the Menu softkey to enter the main menu when the deskset is not in use. Press DIR or CID ������������������������������� to scroll to the feature to be changed. The > symbol indicates the selected menu item. Press the Select softkey to select the menu item. Press the Back softkey to cancel an operation, exit the menu display, o ...
factory set to beep with each key press. You can turn off this beep sound by turning the key tone off. When the deskset is not in use, press the Menu softkey. Press DIR or CID to scroll to Ringer setting. Press the Select softkey. Press DIR or CID to scroll to Ringer tone. Press the Select softkey. Press or to select a desired line (L1, L2, L3 or L4). ...
optimize readability in different lighting conditions. When the deskset is not in use, press the Menu softkey. Press DIR or CID to scroll to Deskset setup. Press the Select softkey. Press the Select softkey to select LCD contrast. Press DIR or CID to adjust the screen contrast level. The screen display temporarily fades away as you press CID and reappea ...
