Qlight QWT Series Quick Start Manual

Text of the manual

Wall Mount LED Signal Tower with Built-in Audible Alarm

QWT Thank you for purchasing Qlight’s products. Please read this user manual carefully prior to installation and operation to ensure safe and correct use. 54 -30~+50 85dB QWTL - 3 - 110/220 - RAG [Model number] [Layer] [Voltage] [Color] | | | | • QWTL • QWTL - BZ • QWTLF • QWTLF - BZ • 1-1

• Protection rating : IP54

• Ambient operating temperature : -30°C to +50°C Current Specifications Voltage Condition AC/DC12V AC/DC24V AC110-220V Light (per Layer) 0.065A 0.050A Max 0.025A Buzzer 0.0

• QWT series can be wired with either an external contact or a transistor.

• When using a transistor, please choose the NPN transistor or PNP transistor which best matches the voltage and product type, then connect them correctly according to the wiring diagram below. • For QWTDLF model, user can choose light function between st

Replacing/ Rearranging LED Lens Units

1. Remove the head cover (②) by loosening the fixing screw (①). 2. Remove the LED unit by pulling it (③) upward. 3. Replace or rearrange the LED units. 4. Assemble in the reverse order of removing the LED units, Be careful not to let the rubber ring(④) fitted on the top of each unit come

Other Security System Manuals