Ram Mounts No-Drill RAM-VB-112 Installation Instructions
Text of the manual
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
Vehicle base for the
SPECIFICATIONS
Placement
Passenger side on the floor, in front of seat
Drilling Required
No - uses existing seat bolts
Seat Configuration
Bucket
Construction/Finish
Steel/Black Powdercoat
Dimensions
A =
Vehicle base for the
INSTALLATION INSTRUCTIONS
If installing this base with a RAM tele-pole™ assembly, attach the lower female pole prior to installing the No-Drill™
base.
1. Move the passenger seat to its rearmost position and remove the plastic trim, covering the seat frame leg closest to
the passenger side door. This piece may be replaced after inst