Mylaps X2 Club Quick Start Manual

Installing the MYLAPS X2 Server Connect the MYLAPS X2 server to the DC mains power supply. As the MYLAPS X2 server has no on/off button it will start working immediately after power is applied. The display in front will show a DC power supply icon . Connect the GPS antenna to the MYLAPS X2 Server to synchronize the MYLAPS X2 server clock to UTC time. When there is GPS reception the display will show a satellite icon wit ...

and the PoE+ power supply are disconnected. Power down will take a few seconds as the MYLAPS X2 Server will close down the database using its internal ‘close down’ power source. The display will show ‘powering down’. Make sure your computer is configured to obtain an IP address automatically. Check the display to see if the MYLAPS X2 Server obtained an IP address from a ...