MTP 1320 Instruction Manual
Text of the manual
Infrared Video Thermometer
Model MTP 1320
MTP Instruments
Tel.: +506 2280-1686 • Fax: +506 2524-2397
[email protected] • www.eproteca.com
Table of Content
1.
Introduction
Page 1
2.
Features
Page 1
3.
Specifications
Page 2
4.
Front panel and button description
Page 3
5.
Menu overview
Page 4
5.1
Measurement modes
Page 4
5.2
CAM mode
Page 5
5.2.1
Capturing picture function
Page 5
5.2.2
Capturing video function
Page 6
5.3
IR mode (only)
Page 6
5.4
Dew point temperature mode
Page 6
5.5
Datalogging
Thank you for purchasing the IR Video Thermometer, model MTP 1320 which is
capable of non-contact (infrared) temperature measurements with visual camera at the
touch of a button. The built-in laser pointer increases target accuracy while the
backlight LCD and handy push-buttons combine for convenient, ergonomic
operation.
The IR video thermo
Distance and Spot Size
As the distance (D) from the object increases, the spot size (S) of the area measured by
the unit becomes larger. The relationship between distance and spot size for each unit is
listed below. The focal point for each unit is 914 mm (36�). The spot sizes indicate 90%
of encircled energy.
3) Specifications
IR temperature measuremen
Battery life :
Approx. 4 hours continuous use
Battery charge time :
Approx. 2 hours with AC adapter or USB connection
Size :
205mm x 62mm x 155mm
Weight :
410 g
4) Front Panel and Button Description
1) LCD display
2) Buttons
3) Battery cover
4) Measurement trigger
5) Retractable lens cover
6) Visual camera
7) Laser
8) IR sensor
9) Type
Description of buttons
1) Up (�) or Picture button
2) ESC button
3) Down (�) or Video button
4) �ENTER� (MODE) button
5. Menu overview
Power ON or power OFF
� Press and hold ESC button to switch the instrument ON.
� Press and hold ESC button to switch the unit OFF.
5.1 Measurement Modes
The IR video thermometer has six measurement modes.
High alarm triggering
Dew point mode
Low alarm
Laser
Low alarm triggering
Scanner
Hold
5.2 CAM Mode
In CAM mode , the meter can measure the IR temperature, air temperature, air humidity,
dew point temperature and wet bulb temperature with camera. The IR maximum (MAX)
temperature, IR m
5.2.2 Capturing video function
In CAM mode, press the � button to enter video taking mode, then press START
with the � button to take video, or press ESC button to escape.
Use the � button to stop video.
5.3 IR Mode
In the IR mode, the meter can measure IR temperature, air temperature, air
humidity, dew point temperature and wet bulb temperature b
In the dew point mode, the percentage bargraph indicates how close the IR
temperature is to the dew point temperature. At 100% the two values are identical.
5.5 Datalogging Mode
In the datalogging mode, first set parameters for high alarm value, low alarm value,
interval time and the line color. Once configured, press the trigger to start logging.
The un