Movon MDAS-20 Installation Manual

Table of Contents Chapter 1. What is MDAS-20? 1.1 Introduction 1.2 Notice Chapter 2. MDAS-20 Features 2.1 Main Functions 2.1.1 LDW (Lane Departure Warning) 2.1.2 DVR (Digital Video Recorder) 2.1.3 FCW (Forward Collision Warning) Chapter 3. Components 3.1 MDAS-20 main unit 3.2 MDAS-20 camera 3.3 Power/ ...

Chapter 1. What is MDAS-20? 1.1 Introduction Movon Advanced Driver Assistance System (MDAS) helps drive safely by using a computer image recognition technology to recognize unintended lane departure and forward collision and provides all-in- one safety driving solution containing the DTG (Digital Tachograph) and DVR (Digital Video ...

Chapter 3. Components 3.1 MDAS-20 main unit 3.2 MDAS-20 camera 3.3 Power/Signal cable 3.4 User manual 3.5 Accessories: Micro SD card, Sticker 3.6 Optional products: Rear camera, GPS modem ...

Chapter 4. Setting 4.1 The process of MDAS-20 installation Identification of location on power, CAN signal, analog signal and vehicle signal connected to the vehicle Fixation of the MDAS-20 main unit in the proper position of the dash board Checking and installing the camera, rear camera and 3G modem to the main unit Checking the co ...

4.2 Setting the camera After removing the double-sided tape of the mount, attach the camera in the proper position of the windshield not to block the driver’s view and secure a good recording position. In case of commercial vehicles such as heavy trucks and buses, attach the camera above the position of the wiper. ※ Caution 1) P ...

With the adjustment of the bolt, the placement of the main unit can be changed in all directions. 4.4 Connecting to the car signal The figure below shows how each component of MDAS-20 should be connected. ...

1. Check the vehicle’s CAN/ANALOG signal at www.mdas.co.kr and go to “MY ACCONT” You need to sign up to this website in order to create your ID and PW.  Log in 1. Find the right model for the vehicle. Be aware that CAN files varies depending on manufacturer, model, manufactured of year, and type of engines (gas, diesel, et ...

3. After checking the cable, connect to the proper signals according to the chart below Car signal Cable color Car signal Cable color LEFT direction Right direction Speed RPM Break HBA DEB_TX DEB_RX 4. In order to make the connection to the signals, open the Shield/ Fuse cover/Glove Box 5. After checking the cables, connect to the p ...

Ex) Position of the signal lights (Bottom of the steering wheel) Checking the cables for the signal lights using the test equipment 6. Connecting the camera cable to the main unit cable. [Main Unit Cable] [Camera Cable] ...