WAVECONTROL SMP2 Operation & User’s Manual
Text of the manual
Electromagnetic Field Meter
SMP2
V 2.01
Safety, Quality, Service
+34 93 320 80 55
www.wavecontrol.com
[email protected]
USER’S MANUAL
Electromagnetic Field Meter
Congratulations for your acquisition
of a Wavecontrol SMP2.
This Manual provides you with instructions
for using and handling your SMP2.
Please read this Manual carefully before
using your SMP2.
Product specifications and descriptions in this document depend on the
firmware version and are
Electromagnetic Field Meter
Index
1. WARNINGS AND PRECAUTIONS ..........................................................5
2. INTRODUCTION .......................................................................................6
3. FIRST STEPS .............................................................................
Electromagnetic Field Meter
8. SMP2 READER SOFTWARE ...............................................................34
8.1 Installation ....................................................................................34
8.2 System requirements ................................................................ 35
8.3 U
Electromagnetic Field Meter
Environmental information
Disposal of your old product:
Your product is designed and manufactured with
high quality materials and components, which
can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means the product is
covered by the European D
Electromagnetic Field Meter
Those measurements can be made quickly and
easily anywhere because the SMP2 is portable
and simple to handle and use.
The SMP2 can sample the field level continuously
and store that data automatically in its built-in
memory at user-configured intervals with a
capacity of up to 1,000,000 sam
Electromagnetic Field Meter
USB-f.o. converter (optional)
USB key
SMP2 (and battery
charger below)
Field Probe
Field Probe
Field Probe
Compartment for USB
cable, f.o. cable (optional),
documents, etc.
Adjustable shoulder strap
Figure 1: Case
3. FIRST STEPS
• SMP2.
• 1 or more electromagnetic field probes.
• Batt
Electromagnetic Field Meter
4. GETTING STARTED
4.1 Overview
The front panel of the SMP2 contains the user
interface, made up of the screen and keypad.
The keyboard presents 8 standard buttons, 4
virtual buttons (below the screen) and 1 ON/OFF
button.
Figure 2: Front
On/Off button
Main screen (see 5.2)
Virtual menu
Vir