Texas Instruments TPS7B82EVM-024 Operation & User’s Manual

Copyright © 2019, Texas Instruments Incorporated TPS7B82EVM-024 Evaluation module User's Guide SBVU052–March 2019 TPS7B82EVM-024 Evaluation module Figure 1. TPS7B82EVM-024 Evaluation Module This user’s guide describes the operational use of the TPS7B82EVM-024 evaluation module (EVM) as a reference des ...

Copyright © 2019, Texas Instruments Incorporated TPS7B82EVM-024 Evaluation module Contents 1 Introduction ................................................................................................................... 3 1.1 Before You Begin................................................... ...

Copyright © 2019, Texas Instruments Incorporated TPS7B82EVM-024 Evaluation module 1 Introduction Texas Instruments' TPS7B82EVM-024 EVM helps design engineers evaluate the operation and performance of the TPS7B82-Q1 linear regulator for possible use in their own circuit application. ...

Copyright © 2019, Texas Instruments Incorporated TPS7B82EVM-024 Evaluation module 2 EVM Setup This section describes how to properly connect and setup the TPS7B82EVM-024, including the jumpers and connectors on the EVM board. 2.1 Input/Output Connectors and Jumper Descriptions 2.1.1 J ...

Copyright © 2019, Texas Instruments Incorporated TPS7B82EVM-024 Evaluation module 2.1.14 TP5: GND Ground test point. 2.1.15 TP6: GND Ground test point. 2.1.16 TP7: GND Ground test point. 2.1.17 TP8: GND Ground test point. 2.1.18 TP9: VOUT VOUT test point. 2.2 Soldering Guidelines To a ...

Copyright © 2019, Texas Instruments Incorporated TPS7B82EVM-024 Evaluation module 4 PCB Layout Figure 2 to Figure 4 show the PCB layout for this EVM. Figure 2. Assembly Layer Figure 3. Top Layer Routing Figure 4. Bottom Layer Routing ...

Copyright © 2019, Texas Instruments Incorporated TPS7B82EVM-024 Evaluation module 5 Schematic Figure 5 is the schematic for this EVM. Figure 5. TPS7B82EVM-024 Schematic ...

www.ti.com 8 SBVU052–March 2019 Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated TPS7B82EVM-024 Evaluation module 6 Bill of Materials Table 2 lists the BOM for this EVM. (1) These assemblies are ESD sensitive, observe ESD precautions. (2) These assemblies must be clean and free from flux and all contaminants ...

1. Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein. User's accept ...

FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and software developers to write software app ...