Atlantic Technology A-2000 Instruction Manual

Warnings Please Read First CAUTION: To reduce the risk of electric shock, do not remove the cover. No user serviceable parts inside. Refer to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. The lightning flash with arrowhead, within an equilateral trian ...

For Future Reference Record your A-2000’s serial number and date of purchase here. The serial number is found on the back panel. Serial Number Date of Purchase The contents of this manual are Copyright © 2002 by Atlantic Technology International, Corp., and may not be duplicated or reproduced by any means, ...

        !"                      #  #                            A-2000 Rear Panel Rear Panel A Audio Inputs (see page 5) Use the INPUT jacks to connect to the out ...

When making connections between any source components and the ampli- fier, or when making connections to any speaker, be certain that both the input device(s) and the amplifier are turned off to assure that there will be no unwanted signal transients that can damage the equipment or speakers. As a rule, it is always ...

A-2000 Rear Panel Connections A-2000 Rear Panel Connections   ! ! #"#" #!  $  )* % !#" % $ "    &! !  ( #"    "   ,  ,         #" !  "  !  "                        ...

The Model A-2000 features a built-in remote turn-on system that will auto- matically switch the amplifier on when a connected device in the system is switched on. Remote Turn-On Using Products Equipped With a Low Voltage Trigger Jack Press the front panel power switch on the amplifier so that it is in the ON pos ...

Troubleshooting Your A-2000 is designed to provide years of trouble free operation. However, as with any sophisticated electronic device, there may be occasional problems upon initial installation, or during the life of the unit. The items on this list are a brief guide to the minor problems that you may be able to correct yourse ...

Suggestion 1 To determine if a cable TV connection is responsible for the hum, first turn all components off. Disconnect the cable TV feed to your system at the first place where it connects to your components. Alternatively, disconnect the cable TV wire (not the AC wire to the cable box, b ...

Specifications Power Output 7 x 120 watts @ 8 ohms, 20 - 20kHz, 0.08% THD Frequency Response 20Hz. -20kHz. +/- 0.3 dB at rated output Total Harmonic Distortion (THD) Less than 0.08% at all frequencies, less than 0.008% at 1 kHz Power Bandwidth 10Hz ...