Phychips RED4S Operation & User’s Manual

Text of Phychips RED4S Operation & User’s Manual

2 March 2018

2 of 14 RED4S User’s Manuals - Preliminary Version Contents 1 Pin Description .................................................................................................................................. 3 1.1 RED4S Pin Description ...........................................................................................................

2 March 2018

3 of 14 RED4S User’s Manuals - Preliminary Version 1 Pin Description 17 18 19 VCC36 GND NC P01_TXD0 NC NC NC NC ISP_MODEb CSE NC P15 P16 P17 P12 NC GND GND P00_RXD0 NC NC RESETb SWCLK SWDIO GND GND GND GND GND GND VCC36P VCC36P 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 GND RFIO GND 1 2 3 4 5 6 7 8 9 10 11 12 13 15 16 14 Figure 1 Pin De

2 March 2018

4 of 14 RED4S User’s Manuals - Preliminary Version 12 P17 Quasi-bi directional I/O port or External Interrupt 5 13 P12_SCL Quasi-bi directional I/O port I2C Clock The pull-up resistor is always switched on. Reserved Address : 0x70, 0x71 14 P11_SDA Quasi-bidirectional I/O port I2C Data In / Out The pull-up resistor is always switched on. Reser

2 March 2018

5 of 14 RED4S User’s Manuals - Preliminary Version 2 Operation Method (Installation guide for power supply) to HOST UART TXD UART RXD J1 1 2 J3 CON3 1 2 3 (optional) U2 VIN 1 EN 2 VOUT 3 to HOST VCC=3.3V LDO ENABLE V_battery V_battery SW1 1 2 When ENABLE is high, RED4S ON RED4S U1 RED4S VCC36 1 GND1 2 GND10 26 GND9 25 P00_RXD0 35 P01_TXD0 34

2 March 2018

6 of 14 RED4S User’s Manuals - Preliminary Version Figure 4 Host MCU Connection Following configuration is used for interfacing to USB transceiver. Figure 5 USB transceiver Connection

Phychips Control Unit Owners Instructions: