Vantec NexStar-DX Installation Manual

Text of the manual

SATA Data and

Power Connector Package content Remove the back panel 1. Slide the tray out 2. Connect the SATA connector 4. Insert the 5.25" device 3. 6. Screw the drive firmly Align the device to the front edge 5. Slide the tray back into enclosure and install the back panel 7.

Copyright © 2016 Vantec Thermal Technologies. All Right Reserved. All Registered Trademarks Belong To Their Respective Companies.

Model: NST-536S3-BK Information in this document is subject to change without notice. Reproduction of these materials in any manner whatsoever without written permission is strictly forbidden. Printed in China Printed on Recycled

More Vantec Enclosure Owners Instructions: