Van Guard VG284-3 Fitting Instructions

VG284-3 3 Heavy duty aluminium roof bars - Fiat Doblo 2010 on / Vauxhall Combo 2012 on SUPPLIED COMPONENTS # DESCRIPTION QTY This FITTING INSTRUCTION is the property of VAN GUARD ACCESSORIES LTD. and must not be used for manufacturing purposes, copied nor communicated in any way to third parties without written permission from VAN GUARD ACCESSORIES LTD. IN8098_A - IW - 03/05/2013 Van Guard Accessories Ltd Fair Oak Close, Exeter Airport Business Park, Exeter, Devon, EX5 2UL www.van-guard.co.uk 1 2 3 4 5 6 7 SUPPLIED FIXING KIT VG284-3 - PAGE 1 OF 3 TOOLS REQUIRED: 10mm SPANNER / RATCHET REAR BRACKET MIDDLE BRACKET FRONT OFFSIDE BRACKET FRONT NEARSIDE BRACKET TOP HAT TOP HAT COVER ROOF BAR 2 2 1 1 6 6 3 # DESCRIPTION QTY 1 2 3 4 5 M6x16 HEX BOLT M6 SERRATED FLANGE NUT M6x16 COACH BOLT RUBBER WASHER M6 SHAKEPROOF 10 12 12 10 10 1 2 3 4 1 3 5 6 2 7 4 5

brackets need to be positioned on the vehicle as shown below with the top hat flange facing inwards. VG284-3 - PAGE 2 OF 3 1 Secure roof brackets to the vehicles fixing points using M6x16 hex bolts, M6 shakeproofs & rubber washers. Ensure that the top hat flange is facing inwards. 3 Place roof bars onto the roof brackets with the t-slot facing upwards, secure using top hat brackets, M6x16 coach bolts & M6 serrated nuts. 4 Remove roof plugs to reveal the vehicles fixing points. 2 FRONT (HANDED) - ILLUSTRATION SHOWS OFFSIDE MIDDLE REAR

Once in position tighten all fixings to 8Nm. Periodically check all fixings. 6 NOTES: Maximum load is 55kg per bar. Please check that the vehicle manufacturers load bearing capacity for the roof is not exceeded. (Refer to the vehicle handbook) Periodically check all fixings. Retain these instructions for future reference. TIGHTEN TO 8Nm Flex the top hat covers over the top hat brackets into position as shown below. Ensure that the covers click into the front and rear of the top hat brackets. 5 1. 2. 3. 4.