Thermon E4X-1 Installation Procedures
Text of the manual
Pipe Mounted Thermostat Kit
INSTALLATION PROCEDURES
Picture Of Completed Product
WARNING: Disconnect Circuit Before Removing Cover
E4X Thermostat
E4X-35235 30A/250 Vac, 25A/277 Vac, 15A/480 Vac
E4X-1-SR 30A/250 Vac, 25A/277 Vac, 15A/480 Vac
E4X-1-ZN 30A/250 Vac, 25A/277 Vac, 15A/480 Vac
for use in NEMA 4X Ordinary Locations
PN 27085-0707
Order Separately . . .
PETK Power and End Termination Kits (per cable)
PETK-1D
for BSX, RSX, VSX
PETK-2D
for KSX, HTSX
PETK-3D
for HPT, FP
Tools Required . . .
E4X-1 INSTALLATION PROCEDURES
The following installation procedures are suggested guidelines
for the installation of termination and connection systems.
Receiving, S
2 Insert cable into expediter piercing grommet.
Slide expediter toward pipe.
min.
300 mm
(12")
Screwdriver
E4X-1
INSTALLATION PROCEDURES
Heating Cable
Overjacket
3 Mount expediter to pipe using banding.
1
Cut end of cable at angle to aid in piercing
grommet.
45°
4 Secure thermostat sensor to pipe using
atta
THERMON . . . The Heat Tracing Specialists
®
100 Thermon Dr. • PO Box 609 • San Marcos, TX 78667-0609
Phone: 512-396-5801 • Facsimile: 512-396-3627 • 1-800-820-HEAT
www.thermon.com In Canada call 1-800-563-8461
Specifi cations and information are subject to change without notice.
Form 50024-0811
For the Thermon offi c