Seuic AutoID 9HC Quick User Manual

AUTOID9/9HC Handheld Terminal Quick User Guide Manual SEUIC Technology Welcome To Use AUTOID 9/9HC Series ...

Contents Guidelines ............................................................................................................................ 3 Laser Scanning Engine Guidelines ............................................... 错误！未定义书签。 Safety Guidelines ............. ...

Battery ........................................................................................... 错误！未定义书签。 Apps .............................................................................................. 错误！未定义书签。 Location access ............... ...

3 Guidelines Laser scanning engine guidelines Laser radiation: Users are prohibited to look straightly at a laser beam . Safety Guidelines  Please use specified battery& charger from SEUIC , or it may cause battery leakage , overheat , burst and on fire .  Please don‟t use un-no ...

4 computer , remove the battery. Please pack and stock the device and battery separately. Both battery and stand-by battery need much time to recharge when you use the device at the first time or reuse the device after long-time stock. Please write down the status of malfunction and con ...

5 Num lock button To be used for digital input Fn lock button To be used for Fn input mode locking Lock screen button Touch screen not operated after lock screen been locked with screen displaying Enter button Confirm Direction button: up Direction button: down Direction button: left Di ...

6 3 Number key 3， D.E.F It‟s F3 key under Fn mode 4 Number key 4， G.H.I, It‟s F4 key under Fn mode 5 Number key 5， J.K.L, It‟s F5 key under Fn mode 6 Number key 6， M.N.O, It‟s F6 key under Fn mode 7 Number key 7， P.Q.R.S It‟s F7 key under Fn mode 8 Number key 8， T. ...

7 interface will appear, then select “power off “ to power off the device. Restart When device is open, but not under sleep status, press power key for 2 seconds , the restart interface will appear, then select “restart” to restart the device. Install SIM Card Install SIM card a ...

8 Notes：1. PSAM card is not supported currently 2 This device doesn‟t support hot plug and must be reset after plugging card. Install Battery Please follow the below steps when install battery： 1. One hand holds device , the other hand turns toggle switch to unlocked side(right ...

9 5. Pull up the battery locker and ensure battery to be locked well; 6. Put battery cover back on the cover locking slot then press slightly to lock it 7. Then press down slightly to lock the cover； 8. Turn toggle switch to the locking side(left side) ...