Playnation Passage II 1850AT Manual 

-NOTICE- This playset is intended for residential use only. it is not intended nor warranted for either public or commercial use. Copyright © 2019 PlayNation Play Systems All Rights Reserved 190 Etowah Industrial Court Canton, GA 30114 www.playnation.com Passage II - Tarp Roof Model: 1850AT (BOXES: 1850-1, 1850-2 & Slide Box) *52-2029-T* 52-2029-T ...

inventory pages in the manual to make sure you have received all necessary parts. The quickest method to get any parts that are missing or damaged is use our “Quick Response Center” located at: www.playnation.com/support DO NOT RETURN THIS PRODUCT TO THE RETAILER OR CONTACT THE RETAILER DIRECTLY. THE RETAILER DOES NOT STOCK COMPONENTS. PLEASE RETAIN ALL INSTRUCTIONS FO ...

free from defects in workmanship and materials, under normal use and conditions, for the lifetime of the product for above ground structural wood components and for two years for the following accessories (e.g., swings, hardware, plastics, tarps, rope ladder, etc.). PlayNation warrants its Premium Redwood swing sets to be free from defec ...

workmanship or materials within the stated warranty period. This decision is subject to verification of the defect, which, at PlayNation’s discretion, may be accomplished by submitting photographs or by delivery of the defective part to PlayNation: PlayNation Play Systems; 190 Etowah Industrial Ct.; Canton, GA 30114. Any warranty claim must inc ...

This product is recommended for use by children ages 3-11. This product is intended for residential use only and not intended for use in any public setting. A safety surface such as mulch or recycled tire should be used under the play set to prevent injury from falls. Also a 6 foot safety zone should be used around the entire play set. As with any home project, good judgment and respect for power tools will greatly reduce the r ...

finest quality products that are designed for outstanding strength and durability. We back our products with an unparalleled warranty. In the unlikely event that you will need to contact us about covered repairs, we must have a valid Product Registration on file. 3 EASY WAYS TO REGISTER OPTION 1 Complete the online registration form at: http://www.playnation.com/register OPTION 2 Fax this completed form t ...

Congratulations! You have just purchase one of the finest residential wooden swing sets available today. As with any wooden product that spends its entire life outside, in varying elements, it is important to know what to expect with your new swing set so that your family can enjoy it for many years. As your swing set acclimates to its new environment, natural characteristics of the wood can show in the form of checks, or “crack ...

Please go to the following links and read important SAFETY information prior to using your new play structure. http://www.playnation.com/safety-and-maintenance.html http://www.playnation.com/manuals.html (Click on your specific model) http://www.playnation.com/warranty.html NOTE: Your children’s safety is our #1 concern. Observing the followin ...

Leveling Fort, General Information and Definitions…………………...................Pages 7-9 How to Install T-nuts, and Swing Beam Loading............................................Pages 10-12 Site Plan, Safety Zone, Required Tool List and Kit Contents.........................Pages 13-15 Hardware, Lumber and Accessory Checklists....…… ...

NOTE: Your children’s safety is our #1 concern. Observing the following statements and warnings reduces the likelihood of serious or fatal injury. Please review these safety rules regularly with your children. • This play set is designed for the use of 4 occupants who have a combined weight not exceeding 800 pounds on the elevated floor, 3 occupants who have a combined weight of 425 pounds on the swing ...

(continued) Playgrounds should be inspected on a regular basis. If any of the following conditions are noted, they should be removed, corrected or repaired immediately to prevent injuries. • Hardware that is loose, worn or that has protrusions or projections. • Exposed equipment footings. • Scattered debris, litter, rocks, or tree roots. • Splinters, large cracks and decayed wood components. • D ...

SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK9 Select Protective Surfacing One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable for the equipment height in accordance with ASTM S ...

Below are some of the recommendations that the U.S. Consumer Product Safety Commission (CPSC) offers from its Handbook for Public Playground Safety. The guide can be downloaded in full at www.cpsc.gov/PageFiles/122149/325.pdf 1. Protective Surfacing - Since almost 60% of all injuries are caused by falls to the ground, protective surfacing under and around all playground equipment is the most critical safety factor on pl ...

under and around equipment where a child might fall. This area should be free of other equipment and obstacles onto which a child might fall. Stationary climbing equipment and slides should have a fall zone extending a Minimum of 6’ in all directions from the perimeter of the equipment. Swings should have a fall zone extending a minimum of 6’ from the outer edge of ...

• Depending on your experience, assembly of the playset can take as little as 6 hours up to 24 hours, depending on size, after inventory of parts; therefore, we recommend you set aside a full two days for assembly. • Identify all of the parts for your play set. Empty each box and lay out boards so you can see each part. Your instruction book will have detailed drawings that will make it easy for you to recogni ...

instructions to aid you in the assembly of your play set. Offset Holes- Throughout the installation procedures we will refer to parts with offset holes. This refers to the orientation of the holes on the board. An offset hole is one that is closer to one side than it is the other or in other words, it is not centered on the board. In the procedures you wi ...

When installing T-nuts into the wood, use a smooth faced hammer to set the face of the T-nut flush into the wood. Insert the barrel of the T-nut into the predrilled hole. Using a smooth faced hammer, drive the T-nut until the face of the T-nut is flush to the wood. This picture shows the T-nut inserted and installed flush to the wood. This picture shows an end view of the T-nut installed flush to the wood. WAR ...