Sensoray 4000 Series Hardware Manual

7313 SW Tech Center Drive | Portland, OR 97203 Embeddable Digital Video Recorders 4000 Series Models 4011, 4012, 4013 Hardware Manual Ver. 2.1.0 | July 2018 ...

Limited warranty ......................................................................................................................... 4 Introduction .................................................................................................................................. 5 Connectors .......................................... ...

Firmware updates ...................................................................................................................... 26 Customizations ............................................................. ...

in material and workmanship and perform to applicable published Sensoray specifications for two years from the date of shipment to purchaser. Sensoray will, at its option, repair or replace equipment that proves to be defective during the warranty perio ...

embedded OEM applications. The family currently includes models 4011, 4012 and 4013. All of those record audio and video (A/V) to USB storage media and can capture JPEG images on-the-fly without interrupting the recording. The units output live or recorded video, ...

Features 4011 4012 4013 External USB ports vertical vertical right-angle Incremental encoder in- terfaces 0 2 2 Built-in microphone yes yes no Line audio input no optional yes RS-232 (Note 1) optional yes yes Note 1: Firmware implementation of RS-232 communications requires knowledge of ap ...

single connector on the bottom side. All connectors are functionally interchangeable. The only difference is that a storage device plugged into the connector on the top side is considered “external”, on the bottom side – “internal”. Mo ...

Accepts a ZIF-style flex tail, 0.1” pitch. Recommended mapping for keypad pins and functions: Pin Function Signal 1 Record/Pause DIO33V0 2 Stop/Back DIO33V1 3 Snapshot DIO33V2 4 Down DIO33V3 5 Menu/OK DIO33V4 6 Common (ground) 7 U ...

Pin Signal 1 ground 2 +12 V DC Video In (J10), out (J2) Molex 0705530002. Mating part: Molex 0050579403. Pin Signal 1 video 2 ground 3 not connected Audio out J13, Molex 0705530003. Mating part: Molex 0050579404. Pin Signal 1 left 2 ground 3 ground 4 right Keypad J1/J4, Standard part: A ...

010LF. Standard pinout: Pin Function Signal 1 Record/Pause DIO33V0 2 Stop/Back DIO33V1 3 Snapshot DIO33V2 4 Down DIO33V3 5 Menu/OK DIO33V4 6 common (ground) 7 Up DIO33V6 Keypad functions could be remapped, as discussed in Customizations chapter, using signal names from the tabl ...