Tormach PCNC 770 Operator's Manual

Please email us: [email protected] All rights reserved. UM10350_PCNC770_Manual_0916A Document Part Number: 35427 ©2015 Tormach Inc. IMPORTANT: Read and understand all operator manual safety precautions and instructions before attempting PCNC 770 installation, operation, or maintenance. Tormach® PCNC 770 Operator Manual ™ ...

This manual contains important safety warnings and operating instructions for the PCNC 770 mill. Refer to these instructions before attempting installation, operation or maintenance. Keep these instructions together with your PCNC 770 mill so they are readily accessible. The most recen ...

Read and understand this manual prior to mill use. Only trained personnel — with a clear and thorough understanding of its operation and safety requirements — should operate this mill. General ...

normally non-flammable materials may be flammable or even explosive. • Chips, dust, and vapors from certain materials can be toxic. Always check the Materials Safety Data Sheet (MSDS) for each material. IMPORTANT: It ...

cabinet while power is on. Only qualified electrical technicians should perform such operations. Retained Electrical Power: Electronic devices within the electrical cabinet may retain dangerous electrical voltag ...

The PCNC 770 is intended for use as a general purpose CNC milling machine. The intended use includes cutting conventional (non-abrasive) materials such as unhardened mild or alloy steels, aluminum, plastics, wood, and similar materials (or any other material that can be cut with a rotati ...

The following table summarizes resolution, accuracy, and repeatability of PCNC mills as delivered. Resolution of Motion (minimum discrete positional move) 0.0001” Ball Screw Positional Accuracy ≤ 0.0006” per foot Combined Positional Accuracy1 ≤ 0.0013” per foot ...

1. Overview 20 1.1 Specifications (PCNC 770) 21 2. Site Planning and Prep 22 2.1 General Site Requirements 22 2.1.1 Space Requirements 22 2.2 Electrical Requirements 22 2.2.1 Grounding 22 2.2.2 Plug Pattern 22 2.2.3 Ground Fault Interrupter (GFI) Use 23 2.2.4 Electrical No ...

27 3.3.5.1 Remove Mill from Pallet 27 3.3.5.2 Lifting Bar Kit 27 3.3.5.3 Lifting from Below 27 3.3.5.4 Moving Kit (PCNC 770 Only) 28 3.3.5.5 Lowering Mill onto Stand 28 3.3.6 Install Tool Tray (PCNC 1100 only) 28 3.3.7 Install Drip Tray 28 3.3.8 Install PathPilot Cont ...

38 4.2 Initializing the Mill 39 4.2.1 Vital Reference 39 4.3 Jogging 39 4.3.1 Manual Control Group 39 4.4 Spindle Controls 40 4.4.1 Manual Spindle Control Via Operator Panel 40 4.4.2 Automated Spi ...