Tormach pathpilot Technical Document
Text of the manual
1071 Uniek Drive, Waunakee, WI 53597
Phone: 608.849.8381 / Fax: 209.885.4534
©Tormach® 2014. All rights reserved.
Specifications subject to change without notice.
TD10358_PathPilot_Controller_QSG_0216A
PathPilot™ Controller Quick Start Guide
Product Identification: PathPilot Controller (PN 35286)
Purpose: This document details set up
1071 Uniek Drive, Waunakee, WI 53597
Phone: 608.849.8381 / Fax: 209.885.4534
©Tormach® 2014. All rights reserved.
Specifications subject to change without notice.
TD10358_PathPilot_Controller_QSG_0216A
Controller Connections
Route cables to avoid creating trip hazards and to protect them from damage; use extension cables where
necessary
1071 Uniek Drive, Waunakee, WI 53597
Phone: 608.849.8381 / Fax: 209.885.4534
©Tormach® 2014. All rights reserved.
Specifications subject to change without notice.
TD10358_PathPilot_Controller_QSG_0216A
Power Connections
Confirm Voltage Setting Switch (#15) is set to the proper voltage for the geographic location before connecting
power.
1071 Uniek Drive, Waunakee, WI 53597
Phone: 608.849.8381 / Fax: 209.885.4534
©Tormach® 2014. All rights reserved.
Specifications subject to change without notice.
TD10358_PathPilot_Controller_QSG_0216A
Power Off/On Procedure
Follow the machine-specific Power Off/On Procedure detailed below:
PCNC 1100, PCNC 770, 15L Slant-PRO
WARNING! El
1071 Uniek Drive, Waunakee, WI 53597
Phone: 608.849.8381 / Fax: 209.885.4534
©Tormach® 2014. All rights reserved.
Specifications subject to change without notice.
TD10358_PathPilot_Controller_QSG_0216A
Initial Configuration
1. Power on the controller according to Power Off/On Procedure detailed earlier in this document.
2. When the end-
1071 Uniek Drive, Waunakee, WI 53597
Phone: 608.849.8381 / Fax: 209.885.4534
©Tormach® 2014. All rights reserved.
Specifications subject to change without notice.
TD10358_PathPilot_Controller_QSG_0216A
3. With the PathPilot controller powered on, click Update on the Status screen (see Figure 3).
4. Navigate to the (vX.X) file on the USB