ATN MO-4 Operation & User’s Manual
Text of the manual
u s e r ` s g u i d e
ATN MO-4
MO-4 user’s guide (Rev. 3, may 2010)
Important Export Restrictions! Commodities, products,
technologies and services contained in this manual are
subject to one or more of the export control laws and
regulations of the U.S. Government and they fall under the
control jurisdiction of either the US Department of State
or the US
The information in this manual furnished for information use only, is subject to change without notice, is not to be
construed as a commitment by ATN Corp.
ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.
©2010 ATN Corp. All right reserved.
Power button
Digital control for IR
Digital control for
P
The Night vision Monocular is a complex opticoelectronic system for individual use. The device
consists of the objective lens assembly, eyepiece and the body. The body contains a image
intensifier tube assembly with an integrated high voltage power source and the three volt bat-
tery housing. When installing the battery one should keep in mind
the smart series will let you know. Our MO-4 scope has a 3-button digital control panel that
allows the user to easily engage the main power, Infrared illuminator and the proximity sensor.
Color coded LEDs let you know the mode of operation you are using.
1. ON/OFF indicator light – when power is ON the LED is green.
2. When the proximity sensor is ac
NOTE: The camera adapter comes with 37-mm and 52-mm threads. If you need other sizes your
local camera store should be able to help.
• Remove the rubber eyecup from the MO4
• Screw the camera adapter onto the front of the lens on your Video camera’s lens or your
35-mm camera’s lens.
• Loosen the three set screws on the camera adapter.
• P
Cleaning The Eyepiece
You may need to clean the eyepiece of the MO4 from time to time in order to guarantee top
performance. When you receive your MO4 you should check for dust on the eyepiece of the
unit.
First you will need to remove the eyepiece. To remove the eyepiece you will need to ini-
tially loosen 2 set screws that can be found on the base.
2 Year product Warranty
This product is guaranteed to be free from manufacturing defects in material and workmanship under
normal use for a period of 2 (two) years from the date of purchase. In the event a defect that is covered
by the foregoing warranty occurs during the applicable period stated above, ATN, at its option, will ei-
ther repair or
©2010 ATN Corporation
For customer service and technical support, please contact
American Technologies Network Corp.
North American Office
1341 San Mateo Avenue, South San Francisco, CA 94080
phone: 800-910-2862, 650-989-5100; fax: 650-875-0129
European Office
The following countries can use our toll free number:
00 800 9102-8620
Austria, France, Germany, H