ATN SR-100 PT Installation And Operation Manual

Text of the manual

427-0027-01-10 Rev. 100 © 2009 FLIR Systems, Inc. Page 1 of 21

SSRR--PPTT TThheerrm maall CCaam meerraa IInnssttaallllaattiioonn aanndd O Oppeerraattiioonn M Maannuuaall Camera Models SR-100 PT SR-50 PT SR-35 PT SR-19 PT ThermalVideo.com Your Source for Modern Thermal Imaging Systems P.O. BOX 4242 Middletown, NY 10

427-0027-01-10 Rev. 100 © 2009 FLIR Systems, Inc. Page 2 of 21

427-0027-01-10 Rev. 100 Date: May 29, 2009 Revision Date Notes 100 05/29/2009 Initial release EXPORT RESTRICTIONS This document is controlled to FLIR Technology Level 2. The information contained in this document pertains to a dual use product controll

427-0027-01-10 Rev. 100 © 2009 FLIR Systems, Inc. Page 3 of 21

Table of Contents WARNINGS AND CAUTIONS ......................................................................................................4 Protect Your Investment .....................................................................................

427-0027-01-10 Rev. 100 © 2009 FLIR Systems, Inc. Page 4 of 21

WARNINGS AND CAUTIONS Protect Your Investment The camera should be installed by a trained professional according to local codes and industry- standard safe practices. Proper ESD protocol should be followed while working inside the unit. The camera is a

427-0027-01-10 Rev. 100 © 2009 FLIR Systems, Inc. Page 5 of 21

Introduction The SR-PT Thermal Camera you have purchased is a sophisticated thermal imaging camera that provides excellent night visibility and situational awareness, even in absolute darkness. The camera has a standard video output that works with digi

427-0027-01-10 Rev. 100 © 2009 FLIR Systems, Inc. Page 6 of 21

Camera Description SR-100 PT The 7° horizontal field of view of the SR-100 provides long range surveillance with high visual acuity of distant targets. The camera features a motorized lens for adjustable focus. Like all SR-PT cameras, the SR-100 provid

427-0027-01-10 Rev. 100 © 2009 FLIR Systems, Inc. Page 7 of 21

Installation The SR-PT Thermal Imaging camera is packaged in a separate box from the pan/tilt base. The wires from the base will need to be connected to the camera through an opening in the back of the camera and the camera will need to be installed on

427-0027-01-10 Rev. 100 © 2009 FLIR Systems, Inc. Page 8 of 21

Accessing the Electrical Connections Figure 2: SR-Series Camera The rear of the enclosure must be removed in order to access the electrical connections. Locate the plastic bag that includes some of the small items that will be required for the installa

427-0027-01-10 Rev. 100 © 2009 FLIR Systems, Inc. Page 9 of 21

Completely remove the left cable gland assembly (it will be replaced by the cable gland that is attached to the cable from the base). Apply Teflon tape to the threads of the cable gland that is on the cable. Attach the camera rear cover to the cable by

Other Security Camera Manuals