Total Control Systems 700-20 Engineering Manual

Text of Total Control Systems 700-20 Engineering Manual

+1 (800) 348-4753
Tele: +1 (260) 484-0382 Fax: +1 (260) 484-9230 [email protected] www.tcsmeters.com © Total Control Systems 2007 Fort Wayne, Indiana U. S. A. ENGINEERING MANUAL 700 SERIES ROTARY FLOW METER
- 1 -
TABLE OF CONTENTS Page No. Table of Contents 1 Quote and Purchase Specifications 2 Rotary Design 3 Meter Type Classification 4 Meter Selection Factors Metrology 5 Accuracy 6 Material Compatibility 6 Flow Rate 6 Pressure 6 Temperature 7 Lubricity 7 Suspension and Suspended Solids 7 Foreign Materials 8 PH 8 Viscosity 8 Pressure Loss 9 Bearing Load 10 Sys
- 2 -
QUOTE & PURCHASE SPECIFICATIONS When issuing quote and purchase specifications and to assure you of receiving a Total Control Systems meter with all of the many performance, installation, operating, and maintenance advantages available only with a TCS meter. We suggest that 700 series meter-engineering specifications include the following statements in
- 3 -
DESIGN The TCS Model 700 series flow meter is a simple and efficient design. The meter consists of a single fluid chamber that contains a single blocking rotor and two displacement rotors whose rotation is synchronized with mating gears. As the fluid enters the fluid chamber, the blocking rotor is forced to rotate. The displacement rotors, also rota
- 4 -
METER TYPES SP STANDARD PETROLEUM For metering refined petroleum products such as Leaded and Unleaded Gasoline, Fuel Oils, Diesel, Bio-Diesel, Kerosene, Vegetable Oils, Motor Oils, Ethylene Glycol (Antifreeze), etc. SPA STANDARD PETROLEUM (AVIATION) For metering refined petroleum products such as Aviation Gasoline, Jet Fuels, Gasoline, Fuel Oils, Diese
- 5 -
METER OPERATING SPECIFICATIONS Meter Type Available Flange Connection* Maximum Capacity Working Pressure Working Temperature** 700-15 SP, SPA, IP & IC 1½”NPT Flange; 2” optional 60 GPM (227 LPM) 150 PSI (10.5 BAR) -40°F to 160°F (-40°C to 71°C) 700-20 SP, SPA, SPD, IP, IC, AF & SS 2” NPT Flange; 1½”optional 100 GPM (380 LPM) 150 PSI (10.5

Total Control Systems Measuring Instruments Owners Instructions: