Pulsar CAL. W440 Manual 

G Message function G 10-hour stopwatch G Countdown timer with preset and adjustable timer functions G Regular alarm and 3-channel single-time alarm G Illuminating light (electroluminescent panel) ENGLISH ...

➡ TIME/ CALENDAR URL MEMO MESSAGE ➡ ➡ ALARM TIMER ➡ ➡ ➡ ➡ ➡ STOPWATCH [horizontal] With each press in TIME/CALENDAR mode, the display changes between horizontal and vertical alternately. B A B [vertical] B ...

Press for 2 to 3 seconds to show TIME/CALENDAR SETTING display. B E L L E L Turn clockwise or counter- clockwise to set the flashing digits. Press to select the digits to be adjusted. Selection of the digits Seconds ➾ Minutes ➾ Hour Date ➾ ➾ L B Return to TIME/CALENDAR mode. Month ➾ ➾ Year ➾ 12-/24-hour indicatio ...

E Turn clockwise or counterclockwise to show CALENDAR display instead of TIME display. TURNING ON/OFF OF HOURLY TIME SIGNAL AND BUTTON OPERATION CONFIRMATION SOUND C With each press, the hourly time signal and sound for button operation confirmation are alternately switched on and off. * When the hourly time signal mark is displayed, the hourly time signal rings every hour on the hour and the confirmation sound beeps with ...

* A message appears and scrolls three times. • If you have recorded any messages, such message alone will be displayed. • If no message is recorded, the built-in messages will be displayed one by one with each press of button E. G The watch also displays a message automatically every 10 minutes. The message scrolls three times. • If you have recorded any messages, such message alone will be di ...

RESET C L START E C L RESET C STOP E L L • • • • • • • C SPLIT RELEASE L SPLIT C L START E C FINISH TIME OF 1ST COMPETITOR FINISH TIME OF 2ND COMPETITOR E 2ND COMPETITOR FINISHES L L Split time measurement Measurement of two competitors C Split / Split release / Reset E Start / Stop / Restart (Press the button.) ...

E Turn clockwise or counterclockwise to select the preset time. Selection of the preset time/adjustable timer 1 min. ⇔ 2 min. ⇔ 3 min. ⇔ 4 min. ⇔ 5 min. ⇔ 10 min. Adjustable timer ⇔ 30 min. ⇔ 25 min. ⇔ 20 min. ⇔ 15 min. ⇔ ⇔ B G Two types of timer are available: 10-channel preset timer and adjustable timer. G The adjustable timer can be set up to 9 hours and 59 minutes in minu ...

TIMER OPERATION E Turn clockwise or counterclockwise to select the adjustable timer. (See the previous page) L Press for 2 to 3 seconds to show ADJUSTABLE TIMER SETTING display. B L E L Press to select the digits to be adjusted (hour/minutes). L E Turn clockwise or counterclockwise to set the flashing digits. L B Return to TIMER mode. C Reset E Start / Stop / Restart (Press the button.) ...

E Clockwise turning: Digits decrease. Counterclockwise turning: Digits increase. Selection of the regular alarm/single-time alarm ⇔ ⇔ ⇔ ➾ ➾ Regular alarm AL-D Single-time alarm-1 AL-1 Single-time alarm-2 AL-2 Single-time alarm-3 AL-3 E Turn clockwise or counterclockwise to select the desired alarm channel. L G Regular alarm and 3-channel single-time alarm are available. G Each of the three single-time alarm ...

L E Press to select the digits to be adjusted (hour/minutes). L L E Turn clockwise or counterclockwise to set the flashing digits. L B Return to ALARM mode. * “ON” mark appears and the alarm is automatically engaged. E ALARM ENGAGEMENT/DISENGAGEMENT G The alarms can be engaged and disengaged independently of one another. Turn clockwise or counter- clockwise to select the desired alarm ...

G Up to 100 URL memos such as Internet homepage address and electronic mail address can be registered for display. G Up to 60 characters can be entered for each URL memo. G The residual memory capacity can also be indicated. B E ...

ENTER CHARACTERS” on pages 17 - 18. L E After the data is entered, press to deactivate NEW DATA ENTRY function. ENTERING A NEW DATA B Press for 2 to 3 seconds to show MENU display. L E Turn clockwise or counterclockwise to select the data entry operation (NEW). E L L * The data you have just entered is registered in memory. Selection of the operation ⇔ ⇔ ⇔ New entry NEW ...

E Turn clockwise or counterclockwise to select the data to be corrected. L B Press for 2 to 3 seconds to show MENU display. L E Turn clockwise or counterclockwise to select the data correction operation (EDIT). L E While “EDIT” is flashing, press to activate DATA CORRECTION function. L Correct the data by operating the buttons as explained in “HOW TO ENTER CHARACTERS” on pages 17 - 18. L E After the data is corrected, ...

Turn clockwise or counterclockwise to select the data to be deleted. E L B Press for 2 to 3 seconds to show MENU display. L E Turn clockwise or counterclockwise to select the single data deletion operation (DEL). L E While “DEL” is flashing, press to activate SINGLE DATA DELETION function. L E Press while “YES” is flashing. L E Press and hold for 4 seconds to delete the selected data. * A confirmation sound beeps and � ...

B Press for 2 to 3 seconds to show MENU display. L E Turn clockwise or counterclockwise to select the all data clear operation (CLR). L E While “CLR” is flashing, press to activate ALL DATA CLEAR function. L E Press while “YES” is flashing. L E Press and hold for 4 seconds to delete all the data. * A confirmation sound beeps and “ALL CLR COMPLETE” is displayed for 2 seconds. Then, the display returns to URL ...

G Selection of the URL memo E Turn clockwise or counterclockwise. * With each turn, the first 16 characters of a stored URL memo are displayed. * The stored data is displayed one by one starting from the last to the first or the first to the last according to the data arrangement in memory by turning button E counterclockwise or clockwise, respectively. G Scroll display of the selected URL memo E Press after selecting a d ...

G Selection of type of characters A Press to select the type of characters. Katakana (Japanese characters) English capital letters ➾ English small letters ➾ Numerals and symbols ➾ ➾ E Turn counterclockwise. G Selection of characters in Japanese syllabary, alphabetical or numerical order A C E ...

or numerical order G Character entry / rightward advancement of cursor E Press to enter the character indicated by the cursor. G Space insertion Press at the same time. C & A G Deletion of one character Press button E while keeping button C pressed. E & C G Rightward advancement of the cursor E & C Turn button E counterclockwise while keeping button C pressed ...

C Press to show the residual memory capacity for URL MEMO mode. * The residual memory capacity is displayed for 2 seconds, and the watch automatically returns to the display previously shown. * The watch will also return to the display previously shown by pressing button B, C or E. C Residual memory capacity / Total memory capacity ...

and displayed together with the date when they are to be displayed. G On the designated date, the registered message scrolls on the display every 10 minutes. G The scrolling message also appears by pressing button E in the TIME/CALENDAR mode. (See “DISPLAYING MESSAGES” on page 5) G The residual memory capacity can also be indicated. * For using t ...