ATS G2110E Operation & User’s Manual

Text of the manual

G2110E Iridium/GPS Location Collar

User’s Manual IMPORTANT: Your G2110E Collar HAS NOT BEEN PROGRAMMED for operation. You must program it in order for it to function. In addition, the Iridium data service for the collar is not active. Please contact ATS to activate the service.

Table of Contents

Section 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . Page 3 Section 2 Theory of Operation . . . . . . . . . . . . . . . . . . . . . . . 3 Section 3 Using ATSFixes for Satellite Collars Software . . . 4 Section 4 Operating the GPS Collar . . . . . . . . . . . . . . . . . . . 7 Sectio

Section 1 Introduction

Thank you for purchasing an ATS Iridium/GPS Collar. The collar you have received has not had a fix schedule program downloaded to it. You will need to load a fix schedule program into the GPS Collar to control the collar's operation. The software you received with the GPS Collar, ATSFixes for Satellite Collars, will

The data may also be retrieved by connecting the collar to a PC and downloading the data via the

ATSFixes software. The VHF transmitter is used to locate the animal in order to retrieve the collar. The collar may be refurbished at ATS’s facility. The G2110E uses a drop-off mechanism, known as a firing “squib” to break the collar off of

The ATSFixes for Satellite Collars Programming Software will estimate the life that you can

expect from your GPS Collar. If you need more life from your GPS Collar than what is estimated, you can go back and adjust the program to give your GPS Collar a longer life. You might decide to take fewer fixes each day, or you might pr

To load a program into the GPS Collar, it will need to be connected to the serial port of your

computer (see steps 2-5 below). If you will only be creating a program to be saved for later use, then connecting the serial port cable is not necessary. Note: Remove magnet prior to programming. 1. Open the ATSFixes for Satellite CollarsSoftware.

6. Fill in the information in each step of the ATSFixes for Satellite Collars software. Each

screen has a Help button, if needed. Note that no offset exists to distinguish between standard time and daylight savings time. Even if your study area has daylight savings time during all or part of your study, the resulting data results will be in

Before the GPS Collar can log its first GPS fix, it will need to acquire almanac data. The GPS

Collar will do this automatically when it tries to log a GPS position fix. If it determines that it doesn't have valid almanac data, it will abandon trying to log a fix and it will get an almanac instead. Alternately, you have the option to force th

Collar attempted break off and succeeded = 27 ppm. If activity is detected during this time,

there will be a double pulse on every 3rd pulse. After pulling off magnet = Double pulse VHF at 48 ppm for a period of 5 minutes only. After the 5 minutes have elapsed, the collar will revert to its regularly scheduled VHF beep pattern. Collar is at L

The GPS fix schedule of your GPS Collar can be adjusted remotely via satellite to a regular

interval (available on collars with serial number greater than 030420). Available intervals are (in minutes): 10, 20, 30, 90, 120, 360, 480, 720, and 1440. The schedule can also be adjusted from these intervals back to the original

Other GPS Manuals